Raman Tools and cutter Grinder is a robust machine capable of dealing with a wide range of tools and Grinder operations. It is available as a steel cabinet mounted; machine is designed for the rapid sharpening of H.S.S. Milling Cutters, Cutters, Spiral Mills, Metal slitting sewer and face cutters, Reamers, Tap and with suitable attachments lathe tools and Mills formed cutter etc.

A totally enclosed wheel head motor with a double ended spindle carrier one standard and one extended wheel adaptor which can be mounted on either sand will receive both the cups and dish wheels supplied with the machine. The spindle, which runs at 2800RPM, is controlled by reversing switch built into the main body of the machine. The wheel is mounted on an engaged based plat which can swivel through 360° and can be hand wheel at the base of the machine. The column can be looked in any position and movement can be accurately controlled by means of friction mounted micrometry dial. The upper work table is provided with the slot which is not only serves as means of fixing the tooth rest etc. but also enables accurate location of the loose center heads. It is graduated either side of the zero setting and can swivel through 180° Provision is also made taper setting in inches per foot. Longitudinal movement of the table is obtained from a rack pinion operated by conveniently laced handle or if required can be operated by hand pressure only. The table is located on accurately machined vee and flat guide ways and is fitted with adjustable stops which can limit the movement of the table in and position. Crass Travers is accurately controlled by a hand wheel situated at the front of the machine which is fitted with a friction mounted dial.

Raman Tools and cutter Grinder is a robust machine capable of dealing with a wide range of tools and Grinder operations. It is available as a steel cabinet mounted; machine is designed for the rapid sharpening of H.S.S. Milling Cutters, Cutters, Spiral Mills, Metal slitting sewer and face cutters, Reamers, Tap and with suitable attachments lathe tools and Mills formed cutter etc.

A totally enclosed wheel head motor with a double ended spindle carrier one standard and one extended wheel adaptor which can be mounted on either sand will receive both the cups and dish wheels supplied with the machine. The spindle, which runs at 2800RPM, is controlled by reversing switch built into the main body of the machine. The wheel is mounted on an engaged based plat which can swivel through 360° and can be hand wheel at the base of the machine. The column can be looked in any position and movement can be accurately controlled by means of friction mounted micrometry dial. The upper work table is provided with the slot which is not only serves as means of fixing the tooth rest etc. but also enables accurate location of the loose center heads. It is graduated either side of the zero setting and can swivel through 180° Provision is also made taper setting in inches per foot. Longitudinal movement of the table is obtained from a rack pinion operated by conveniently laced handle or if required can be operated by hand pressure only. The table is located on accurately machined vee and flat guide ways and is fitted with adjustable stops which can limit the movement of the table in and position. Crass Travers is accurately controlled by a hand wheel situated at the front of the machine which is fitted with a friction mounted dial.