Technico environmental / stability chamber is a doubled walled chamber. The inner chamber is made of 304 stainless steel material with mirror finish. The outer wall is made of mild steel with powder coating finish or alternately stainless steel 304 with or without epoxy powder coating finish for excellent looks.

This is a double walled construction, interior made of thick gauge stainless steel sheets of 304 grade and exterior made of cold rolled mild steel sheets finished in powder coat. Inter space in between the walls is packed with glass puff. The door is doubled walled having toughened glass window and seals against atmospheric infiltration by rubber gasket. The inner chamber accommodates stainless steel trays at adjustable height.

Heating elements are made of nichrome heating coils evenly distributed at the back side of the chamber. Forced Air circulation fan assembly is incorporated to maintain uniform temperature inside the working chamber.

Temperature below ambient is achieved by refrigeration system consists of evaporator coils, compressor, condenser, fan motor and accessories.

Humidity is attained by the mist of water that is circulated inside the chamber for maintaining 40 % to 95 % humidity. A water reservoir will be provided with auto law level water cut off device and alarm.

Humidity is controlled by a microprocessor based PID humidity controller, with sensitivity of 3 %. Temperature below controlled by microprocessor based PID temperature controller from + 10 to 60 °C with an accuracy of 1 ° C.

A compact control panel with switches, indicating lamps, digital PID controllers etc, is located at the side of the chamber for operational convenience.

Illumiation is provided with Fluroscent lamps with cyclic timer.

Technical Specification:

• No. trays : 2 or 3 
•  MOC of Trays : SS 304 
•  Temp. controller : Microprocessor based PID type 
•  RH Controller : Microprocessor based PID type 
•  Power supply : 230 V AC, single phase / 415 V, 3 phase, 50 cys. 
•  Temperature Range : 15 to 60 degs C ± 1 degs C 
•  Humidity Range : 45 % to 95 % ± 3% RH 
•  Temp.range for RH operation : 20 to 60 Degs C only.

Options:

Timer, voltage stabilizer, Programmable controller, Recorder, PC interface small & bigger sizes also available based on request.

Technico environmental / stability chamber is a doubled walled chamber. The inner chamber is made of 304 stainless steel material with mirror finish. The outer wall is made of mild steel with powder coating finish or alternately stainless steel 304 with or without epoxy powder coating finish for excellent looks.

This is a double walled construction, interior made of thick gauge stainless steel sheets of 304 grade and exterior made of cold rolled mild steel sheets finished in powder coat. Inter space in between the walls is packed with glass puff. The door is doubled walled having toughened glass window and seals against atmospheric infiltration by rubber gasket. The inner chamber accommodates stainless steel trays at adjustable height.

Heating elements are made of nichrome heating coils evenly distributed at the back side of the chamber. Forced Air circulation fan assembly is incorporated to maintain uniform temperature inside the working chamber.

Temperature below ambient is achieved by refrigeration system consists of evaporator coils, compressor, condenser, fan motor and accessories.

Humidity is attained by the mist of water that is circulated inside the chamber for maintaining 40 % to 95 % humidity. A water reservoir will be provided with auto law level water cut off device and alarm.

Humidity is controlled by a microprocessor based PID humidity controller, with sensitivity of 3 %. Temperature below controlled by microprocessor based PID temperature controller from + 10 to 60 °C with an accuracy of 1 ° C.

A compact control panel with switches, indicating lamps, digital PID controllers etc, is located at the side of the chamber for operational convenience.

Illumiation is provided with Fluroscent lamps with cyclic timer.

Technical Specification:

• No. trays : 2 or 3 
•  MOC of Trays : SS 304 
•  Temp. controller : Microprocessor based PID type 
•  RH Controller : Microprocessor based PID type 
•  Power supply : 230 V AC, single phase / 415 V, 3 phase, 50 cys. 
•  Temperature Range : 15 to 60 degs C ± 1 degs C 
•  Humidity Range : 45 % to 95 % ± 3% RH 
•  Temp.range for RH operation : 20 to 60 Degs C only.

Options:

Timer, voltage stabilizer, Programmable controller, Recorder, PC interface small & bigger sizes also available based on request.