Techinco Fusion or Crucible furnace is specially designed for top loading of materials under test where the maximum temperature inside the chamber required is of the order of 1350 Deg. C. and above in which samples in small crucibles can be kept for the heating process.

The outer chamber is fabricated out of thick gauge mild steel sheets fully reinforced, with horizontal / vertical angle / channel iron frame make the equipment mechanically very rigid.

The inner chamber is formed by high temperature withstanding Silicon Carbide plates capable of withstanding temp. up to 1400 Deg. C. and having provision for insertion of silicon Carbide plates Rods on both sides horizontally for maintaining uniform temperature of 1350 Deg. C and above.

The furnace will be provided with Top door which can be lifted by means of a paddle and slide out to one side to load and unload the furnace. Precaution will be taken to ensure the smooth operation at elevated temp.

Silicon Carbide rods are suspended in both the sides & bottom of the inner chamber will be used as heating elements to heat the change to temperature of 1350 Deg. C and above. The Silicon carbide rods will be provided with M type clamps or both ends of the furnace and will be inter connected with the aid of aluminum braided wires. The silicon carbide rods possess a unique quality of ageing. To exploit the property of ageing the power to the heating elements will fed through a thriystor power control device for control of power to be silicon carbide rods to ensure long life to the heating elements.

The temperature inside the chamber is indicated and controlled by Digital PID temperature indicator cum controller working in conjuction with Pt /Pt /Rh 13 % to an accuracy of ± 1 to 2 Deg. C. to exactly know the temperature of the test sample.

A separate compact control panel accommodating the following components will be supplied along with the oven :

• Pilot indicating lights 
•  HRC fuse unit 
•  EUROTHERM / SHINKO digital programmable PID temp. indicator cum controller. 
•  Voltmeter with selector switch. 
•  Ammeter (AE) – 3 Nos.

WORKING CHAMBER SIZE AS REQUIRED.

Techinco Fusion or Crucible furnace is specially designed for top loading of materials under test where the maximum temperature inside the chamber required is of the order of 1350 Deg. C. and above in which samples in small crucibles can be kept for the heating process.

The outer chamber is fabricated out of thick gauge mild steel sheets fully reinforced, with horizontal / vertical angle / channel iron frame make the equipment mechanically very rigid.

The inner chamber is formed by high temperature withstanding Silicon Carbide plates capable of withstanding temp. up to 1400 Deg. C. and having provision for insertion of silicon Carbide plates Rods on both sides horizontally for maintaining uniform temperature of 1350 Deg. C and above.

The furnace will be provided with Top door which can be lifted by means of a paddle and slide out to one side to load and unload the furnace. Precaution will be taken to ensure the smooth operation at elevated temp.

Silicon Carbide rods are suspended in both the sides & bottom of the inner chamber will be used as heating elements to heat the change to temperature of 1350 Deg. C and above. The Silicon carbide rods will be provided with M type clamps or both ends of the furnace and will be inter connected with the aid of aluminum braided wires. The silicon carbide rods possess a unique quality of ageing. To exploit the property of ageing the power to the heating elements will fed through a thriystor power control device for control of power to be silicon carbide rods to ensure long life to the heating elements.

The temperature inside the chamber is indicated and controlled by Digital PID temperature indicator cum controller working in conjuction with Pt /Pt /Rh 13 % to an accuracy of ± 1 to 2 Deg. C. to exactly know the temperature of the test sample.

A separate compact control panel accommodating the following components will be supplied along with the oven :

• Pilot indicating lights 
•  HRC fuse unit 
•  EUROTHERM / SHINKO digital programmable PID temp. indicator cum controller. 
•  Voltmeter with selector switch. 
•  Ammeter (AE) – 3 Nos.

WORKING CHAMBER SIZE AS REQUIRED.