Tile Fixing Adhesive

Listing ID #5028703

Feature :

• Ready to use, only water to be added.
• High strength with improved adhesion.
• No Slump & Non Sagging
• Good workability & Better Coverage.
• Suitable for internal application of Vitrified & Ceramic tiles On wall & floor, any type of exterior flooring.

Direction for Use

• Surface Preparation : The surface to be tiled must be firm and clean, free from dust, waxes, paint and other contamination.
• Mixing : Mix with clean water using 5-6 liters per 20 Kg. bag to a thick creamy consistency. Adjust mix to suit users preference. Mix sufficient to last 30-60 minutes. Allow to stand for 5-10 minutes and stir again before use.
• Application : Apply with a notched trowel. The final bed thickness must not be less than 2 mm for wall and 3 mm for floors, to accommodate movement. Spread about 1 meter at a time. Tiles must be set in place while the adhesive is still wet on the surface. Press tiles firmly on to the adhesive using a slight sliding motion.
• Safety Precautions : Non-toxic, but contains cement which contains silica. Wear gloves and appropriate respirator.