Tile Adhesive Liquid

Perma Liquid Tile Adhesive is a complex polymer based white liquid. Perma Liquid Tile Adhesive is added to the bedding mortars used for fixing ceramic tiles, granites slabs or marbles slabs on horizontal surfaces. Perma Liquid Tile Adhesive dramatically enhances the adhesive, tensile and water-proofing properties in the mortars so that it prevents weeping joints in the floors and skirting. Perma Liquid Tile Adhesive can be added to neat cement as well to improve the properties of the paste.
Specification : BS. 5980: 1980 Draft CEN: prEN12004 -1997
Primary Uses :

• For fixing ceramic tiles on concrete or mosaic floors
• For fixing granites labs on concrete floors
• For fixing marble slabs on floors
• For fixing skirting on the walls
• For fixing glazed, ceramic tiles to walls & floor areas

Advantages :

• Liquid Tile Adhesive waterproofs the tiled area
• Improves adhesion and tensile strength of mortars
• It is economical
• Easy to use
• Non-toxic

Directions For Use :

• For fixing ceramic tiles, granites labs, marble Slabs to the concrete floors â�� dry mix 15 kgs of cement (use white cement for fixing marble) with 50 kgs of fines and add two litres of Perma Liquid Tile Adhesive and water to get the desired consistency. Lay the mortar on the floor and spread it evenly. Press the ceramic tiles, granite or marble to position.
  
  • Mix cement : 15 kgs
  • Fine sand : 50 kgs (1:2 by volume)
  • Perma LTA : 2 litres
  • Water : 2 to 3 litres
  This mortar is sufficient to fix 37sq.ft of tiles with a 5mm thick bed.
• For fixing ceramic tiles, granite or marble on existing mosaic floor â�� Dry mix 15kgs cement (use white cement for fixing marble) with 25kgs of fines and passing 300 micron sieve or use quartz or silica powder. Add two litres of Perma Liquid Tile Adhesive and water to desired consistency. Prime the back of the tile and the mosaic floor just before laying of the mortar with Perma Liquid Tile Adhesive mixed with neat cement (grey or white) mixed in the proportion of 1:1 by volume. Lay the smooth consistency mortar on the primed mosaic floor and spread it evenly. Press the primed tile or slab to position. Please note that the brush applied primer has a tendency to dry quickly. Hence prime the tile, granite or marble just before fixing.

Tile & Floor Primer :

• Cement : 1kg
• PermaLTA : 1litre

This covers about 20 to 30 square feet
Mix :

• Cement : 15kgs
• Quartz/Silica powder or : 1:1 by volume
• Very fine sand : 25kgs
• Perma LTA : 2 litres
• Water : 2 to 3 litres

This mortar is sufficient to fix 42 sq.ft. of tiles on existing mosaic with a 3mm thick bed.
Properties :

• Form : Liquid
• Color : Milky white
• Specific Gravity : 1.15 at 20^oC
• Chemical nature : Anionic
• PH : 8-9
• Solubility : Mixes freely with water
• Application temperature : above5^oC
• Toxicity : Non-toxic to contact
• Particle size : 1micron
• Anti-oxidant : yes
• Bacteriocide :yes
• Antifoam yes

Packing : Perma Liquid Tile Adhesive is available in 2 Litres, 5Litres and 20litres packing.
Shelf-life : 24 months from the date of manufacturing if stored in manufacturer's original packing in cool and dry place.