Listing ID #2720407
Company Information
Ask for more detail from the seller
Contact SupplierIn order to deliver consistent quality products, we keep our vigil eyes on product development, storage and final dispatch. With the assistance of skilled professionals and high-grade packaging system, we can easily furnish customized packaging requirements of the customers.
Three Major Types of Thermowells :
Bar Stock Thermowells are offered for Insertion Lengths up to 600mm as a Standard. Insertion Lengths can also be provided up to 900mm in Bar Stock if required. Fabricated Thermowells are generally preferred for Insertion Lengths above 600mm. We have a IN HOUSE Wake Frequency Calculator , in accordance with ASME PTC 19.3 TW-2010 for determining the Insertion Length and the Type of Construction best suited for the Process Parameters as required by the Client.
Our extensive internal database, on material selection, for the Thermowells ,assist us in recommending and suggesting a suitable MOC for the product which will bring out the Optimum performance of the Thermowells under the process parameters and different types of Process Fluids.
We also offer Thermowells with Sleeves, Coatings and Linings customized to suit the Client’s requirements. Thermowells with more than one material as MOC can also be offered for minimizing cost and improving the efficiency, response and longetivity of the Thermowell under harsh and corrosive conditions.
Type | Bar Stock Flanged ( BF), Bar Stock Threaded (BT), Bar Stock Weld In (BW) |
---|---|
Std rod diameter in mm | 28,32,34,36,45,50,r Weld In Type55 (any other on request). Hex Head can also be provided |
Material of Construction(M.O.C) For Bar and Flange | SS304, SS316, SS310, SS321, SS446, SS316L, SS317, CS, A105 INCOLOY- 825, Inconel- 600, Incoloy-800, Hastelloy C-276, Monel-400, Titanium-ii, Nickel-200, Kanthal (Any other on request) |
Construction | Straight, Tapered, Stepped |
Instrument Connection | ½”NPT(F), ½”BSP(F), ½”BSPT(F), PF(F), NPSM(F) (any other on request) in all thread sizes |
Process Connection | For Flanged Type (As per ANSI, BS, JIS, DIN or any other) Size - ½”, 1”, 1 ½”,2”,3” (any other on request) Rating - 150#, 300#, 600#, 900#, 1500#, 2500# Facing - RF, FF, RTJ, LT, LG, WNRF, SORF (any other on request) For Threaded Type : Size - ¼”, 3/8”, ½”, ¾”, 1”, 1.1/4”, 1.1/2” ( Any other on request) Threads - M18X1.5, M20X1.5, M24X1.5, M27X2, M33X2 (any other on request) NPT, BSP, BSPT, PF, NPSM (any other on request) For Weld In Type : Socket Weld, Direct Weld. |
Bore in mm | 6.5, 7, 8.5, 9, 10.5, 11, 12, 13 (any other on request, suitable for the Insert OD) |
Cold End Diameter in mm | Provided as per requirement |
Hot End OD in mm | Provided as per requirement |
Insertion Length “U” in mm |
Provided as per requirement |
Extension Length ”T” in mm | Provided as per requirement |
TIP Thickness in mm | Provided as per requirement( Standard-6mm) |
Wall Thickness in mm |
2.5mm as a standard ( Any other as per Bore / Hot End OD size) |
Surface Finish | 16-32 Rs as standard 4 to 12 Ra on request |
Welding for Flanged Type TW |
By TIG(Argon) “V” Groove welding on both sides of Flange. |
Additional Requirements | Ultrasonic Test for Weld Joints Radiography Test for Bore Concentricity Radiography Test for Weld joints Full Penetration Welding. IBR ( Steam, Feed Water Service) For H2 Service( Hardness Check, Post Weld Heat Treatment, Ferrite No Test) NACE ( MR-0175, MR-0103) Ti, Ni, HaC, Ta Sleeve ( only for straight Construction), Sleeve thickness and Construction of Thermowell as per requirement PTFE, PFA, PVDF, Stellite, Tungsten Carbide Coating, coating thickness as per requirement Special Cleaning for Oxygen Service. Stubs/ Nozzles/ Expanders/ Reducers/ End Fittings(Weldolet, Sockolet, Half Coupling, Coupling, Latrolet) can also be also provided Customized special Design Thermowells also can be manufactured. |