Thermowell

Listing ID #3975262

Get Latest Price

Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

View More Details

Product Details

A Thermowell is a protective enclosure for Temperature Gauges and Temperature Sensors ( Inserts), which enhance the life of the Inserts from the corrosive and abrasive( harsh) service conditions at the installation point without affecting the performance of the Temperature Sensors or Gauges. A Thermowell allows the temperature sensor to be removed and replaced without compromising either the ambient region or the process.

We at Goa Instruments, strive to provide Thermowells, which suit the Process Parameters like Pressure, Temperature, Density, Viscosity, and Velocity in accordance with International PTC Standards.

Three Major Types of Thermowells. Using Bar

Bar Stock Flanged
Bar Stock Threaded
Bar Stock Weld In

Using Pipe & Bar

Fabricated Flanged
Fabricated Threaded
Fabricated Weld In

Bar Stock Thermowells are offered for Insertion Lengths up to 600mm as a Standard.

Insertion Lengths can also be provided up to 900mm in Bar Stock if required.

Fabricated Thermowells are generally preferred for Insertion Lengths above 600mm.

We have a IN HOUSE Wake Frequency Calculator , in accordance with ASME PTC 19.3 TW-2010 for determining the Insertion Length and the Type of Construction best suited for the Process Parameters as required by the Client.

Our extensive internal database, on material selection, for the Thermowells ,assist us in recommending and suggesting a suitable MOC for the product which will bring out the Optimum performance of the Thermowells under the process parameters and different types of Process Fluids.

We also offer Thermowells with Sleeves, Coatings and Linings customized to suit the Client’s requirements.

Thermowells with more than one material as MOC can also be offered for minimizing cost and improving the efficiency, response and longetivity of the Thermowell under harsh and corrosive conditions.

Type:	Bar Stock Flanged ( BF), Bar Stock Threaded (BT), Bar Stock Weld In (BW)
Std rod diameter in mm	28,32,34,36,45,50,55 (any other on request). Hex Head can also be provided
Material of Construction(M.O.C) For Bar and Flange :	SS304, SS316, SS310, SS321, SS446, SS316L, SS317, CS, A105 INCOLOY- 825, INCONEL- 600, INCOLOY-800, HASTELLOY C-276, MONEL-400, TITANIUM-II, NICKEL-200, KANTHAL (Any other on request)
CONSTRUCTION	Straight, Tapered, Stepped
INSTRUMENT CONNECTION	½”NPT(F), ½”BSP(F), ½”BSPT(F), PF(F), NPSM(F) (any other on request) in all thread sizes
PROCESS CONNECTION	For Flanged Type (As per ANSI, BS, JIS, DIN or any other) Size - ½”, 1”, 1 ½”,2”,3” (any other on request) Rating - 150#, 300#, 600#, 900#, 1500#, 2500# Facing - RF, FF, RTJ, LT, LG, WNRF, SORF (any other on request) For Threaded Type Size - ¼”, 3/8”, ½”, ¾”, 1”, 1.1/4”, 1.1/2” ( Any other on request) Threads - M18X1.5, M20X1.5, M24X1.5, M27X2, M33X2 (any other on request) NPT, BSP, BSPT, PF, NPSM (any other on request) For Weld In Type Socket Weld, Direct Weld.
BORE in mm	6.5, 7, 8.5, 9, 10.5, 11, 12, 13 (any other on request, suitable for the Insert OD)
COLD END DIAMETER in mm	Provided as per requirement
HOT END OD in mm	Provided as per requirement
INSERTION LENGTH “U” in mm	Provided as per requirement
EXTENSION LENGTH ”T” in mm	Provided as per requirement
TIP THICKNESS in mm	Provided as per requirement( Standard-6mm)
WALL THICKNESS in mm	2.5mm as a standard ( Any other as per Bore / Hot End OD size)
SURFACE FINISH	16-32 Rs as standard 4 to 12 Ra on request
WELDING FOR FLANGED TYPE TW	By TIG( Argon) “V” Groove welding on both sides of Flange.
ADDITIONAL REQUIREMENTS	Ultrasonic Test for Weld Joints Radiography Test for Bore Concentricity Radiography Test for Weld joints Full Penetration Welding. IBR ( Steam , Feed Water Service) For H2 Service( Hardness Check, Post Weld Heat Treatment, Ferrite No Test) NACE ( MR-0175, MR-0103) Ti, Ni, HaC,Ta Sleeve ( only for straight Construction), Sleeve thickness and Construction of Thermowell as per requirement PTFE, PFA, PVDF , Stellite, Tungsten Carbide Coating, coating thickness as per requirement Special Cleaning for Oxygen Service. Stubs/ Nozzles/ Expanders/ Reducers/ End Fittings(Weldolet, Sockolet, Half Coupling, Coupling, Latrolet) can also be also provided Customized special Design Thermowells also can be manufactured.

Company Details

Welcome to M/s Goa Instruments Industries Pvt . Ltd. Established by Mr. M. T Kulkarni, it is a family owned company. He is a Mechanical Engineer with over 42 years of experience of manufacturing process control instruments for measurement of Temperature, Pressure, Flow, Level & Instrumentation Valves.
With “GOA INSTRUMENTS” customer has the option of buying all primary process control instruments in range of TEMPERATURE, PRESSURE and FLOW in one single basket. We are the leaders in manufacturing various types of Resistance Temperature Detectors, Thermocouples, Temperature Gauges, Pressure Gauges and Thermowells for Industrial applications like Sugar, Power, Oil, Gas, Petrochemical, Fertilizers and many other process Industries.
The company has many sets of excellent mechanical processing equipments and modern inspection and testing equipments for our products. A-State-of-the-Art manufacturing facility, continuous Research & Development, innovative technology & stringent quality control at every stage have been some of the key factors in the manufacturing of our products.
We are not only the manufacturer but the solution providers. We have built world class reputation of total understanding of customers requirements and needs, thus delivering excellent products and services at competitive prices. Qualified members of our team are engaged in customizing newer solutions to solve problems, striving for improvement. For us, commitment and integrity are valued the most, which reflects in the philosophy of achieving total customer satisfaction.