Techno Air Showers

Techno Air Showers are factory assembled systems designed to deliver a spray of HEPA filtered air at approximately 3000 fpm from adjustable nozzles in the ceiling or opposing walls to departiculate fully gowned personnel just before they enter controlled environments.
Working of the Air-shower
" TECHNO" Air Shower is an equipment which is installed at the entrance of a contamination controlled environment to remove dust & bacteria adhered to the garments of the personnel entering the clean room.

• In Auto mode : The Auto/Manual switch should be turned towards the Auto position and as the person enters the shower, the push button switch on the top of the door starts the shower for pre selected time cycle. Actuation of the unit locks all the doors during the shower cycle. Only one door can be opened at a time. Incase of emergency, the shower can be put off by turning the switch towards the Emergency off position indicated on top of the Auto/Manual switch
• In Manual mode : The Auto/Manual switch should be turned towards the Manual position and shower can be switched on & off by the switch provided for the purpose and all the other functions remain the same. In case of emergency, the shower can be put off by turning the switch towards the Emergency off position indicated on top of the Auto/Manual switch.
• In Continuous Run mode : The Auto/Manual switch should be turned towards the Emergency off position and the Air Shower can be put on & off by the switch provided for the same The Locks of the doors can be switched off by the Lock By- Pass switch. With start of the cycle, entry door closes and the stream of high velocity air from the nozzles from the sides and top brushes person of the dust and unseen bacteria. Dust particles are swept away through the floor level exhaust ducts and trapped in the filters. : Pre filters to protect HEPA Filter having an efficiency of 99.97 % down to 0.3 microns particle size