Taper Bushes

Supply TypeManufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

Application Allow easy installation application for any rotating parts (Rotors, Pulleys, Sprockets, Impellers) to a shaft. Approx weight in kg for a minimum bore size A taper bushing is deigned by....

View More Details

Send Enquiry

Company Information

Derk Industries

Ring Road, Rajkot, Gujarat

View Number

Member Since 17 Years
Nature of Business Manufacturer
Year of Establishment 1996

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

Application

Allow easy installation application for any rotating parts (Rotors, Pulleys, Sprockets, Impellers) to a shaft.
Approx weight in kg for a minimum bore size
A taper bushing is deigned by 4 digit representing two numbers, The first numbers represent the maximum bore size ( in Inches), The second numbers represent the bushing length( In Inches).
For example : A 1008 has a max bore of 1.0" and total Length is 0.875"

Installation – Remove

Do not use lubricants or anti seize compounds on bushing and hub mounting area.

Quick installation

Insert bush in hub with align drilled holes of bushing with tapped holes in hub.
Greasing thread and point of grub screw or in cap crews greasing threads and under head. Insert screws through tapped holes in pulley hub and thread loosely.
Position assembly on shaft and tighten screws progressively and uniformly until obtain fully secured grip.
After drive has been running under load for a short time stop and check tightness of screws.
Fill empty holes with grease to exclude dirt.

Fast Remove

Remove screws from hub and thread in to tapped holes in bushing, tighten alternately until bushing free from hub.
Remove assembly from shaft.

Tapered precision fit

Precision machining of the tapered bore in the component the tapered mating surface of the bushing insures a snug, precision fit between rim and bushing.

Fully interchangeable with other TB Bushings

As in the case of Derk Taper bushings & pulleys also conform to standardize in dimensions, because of this feature and stock bushing may be interchanged with the same size bushing.

Important Reminder

All operational power transmission products when used in a drive are potentially dangerous and must be guarded by the user as required by applicable laws, regulations standards and good safety practice.

Bushing Material

Taper bushing material close cast iron FG20.
Spheroidal graphite (S.G.) iron for higher stress application.
As per customer requirement.

Bushing No	Bore Size		No of Screws	Size of Screws	Major OD A	Total Length B	Hub Die. C	Approx Weight In KG
Bushing No	Min	Max	No of Screws	Size of Screws	Major OD A	Total Length B	Hub Die. C	Approx Weight In KG
1008	9.52	25	2	1/4 X 1/2	35.32	22.22	56	0.120
1108	9.52	28	2	1/4 X 1/2	38.37	22.22	60	0.150
1210	11.00	32	2	3/8 X 5/8	47.62	25.40	83	0.260
1215	11.00	32	2	3/8 X 5/8	47.62	38.10	83	0.380
1610	14.00	42	2	3/8 X 5/8	57.15	25.40	92	0.390
1615	14.00	42	2	3/8 X 5/8	57.15	38.10	92	0.570
2012	14.00	50	2	7/16 X 7/8	69.80	31.75	112	0.750
2017	14.00	50	2	7/16 X 7/8	69.80	44.45	112	1.000
2517	16.00	60	2	1/2 X 1	85.72	44.45	124	1.600
2525	16.00	60	2	1/2 X 1	85.72	63.50	124	2.220
3020	25.00	75	2	5/8 X 1 1/4	107.96	50.80	159	2.800
3030	25.00	75	2	5/8 X 1 1/4	107.96	76.20	159	3.900
3535	35.00	90	3	1/2 X 1 1/2	127.00	88.90	178	6.520
4040	40.00	100	3	5/8 X 1 3/4	146.00	101.60	216	9.720
4545	55.00	110	3	3/4 X 2	161.92	114.30	242	13.00
5050	77.00	125	3	7/8 X 2 1/4	177.80	127.00	267	15.500

Share your requirements for a quick response!

Tell us what you need?

Looking for Taper Bushes?

Quantity

Seller Contact Details

SellerDerk Industries
Address Ring Road, Rajkot, Gujarat

View Mobile No

Send Enquiry

Taper Bushes

Product Details

Company Details

Looking for Taper Bushes?

Our Services

Buyers

Sellers

Quick Links