Listing ID #460164
Company Information
Ask for more detail from the seller
Contact SupplierWe have carved a niche in the market a prominent manufacturer, supplier and exporter of t-slot milling cutters. Use of premium quality raw materials make these t-slot milling cutters highly resistant to heat and corrosion. Specifications of the t-slot milling cutters conform to is 2668 – 1978 standards. These t-slot milling cutters can be easily installed. These right hand t-slot milling cutters are normally supplied with straight teeth unless otherwise specified.
available in
Diameter (in mm) | Width | Dia. of Shank | Overall Length | Woodruff Keys to IS - 2294 |
---|---|---|---|---|
10.5 | 2 | 6 | 50 | 2 x 3.7 |
10.5 | 2.5 | 6 | 50 | 2.5 x 3.7 |
10.5 | 3 | 6 | 50 | 3 x 3.7 |
13.5 | 3 | 10 | 56 | 3 x 5.0 |
13.5 | 4 | 10 | 56 | 4 x 5.0 |
16.5 | 3 | 10 | 56 | 3 x 6.5 |
16.5 | 4 | 10 | 56 | 4 x 6.5 |
16.5 | 5 | 5 | 56 | 5 x 6.5 |
19.5 | 4 | 10 | 56 | 4 x 7.5 |
19.5 | 5 | 10 | 56 | 5 x 7.5 |
19.5 | 6 | 10 | 63 | 6 x 7.5 |
22.5 | 5 | 10 | 63 | 5 x 9.0 |
22.5 | 6 | 10 | 63 | 6 x 9.0 |
22.5 | 8 | 10 | 63 | 8 x 9.525.5 |
25.5 | 6 | 10 | 63 | 6 x 10 |
28.5 | 6 | 10 | 63 | 6 x 11 |
28.5 | 8 | 10 | 63 | 8 x 11 |
28.5 | 10 | 12 | 71 | 10 x 11 |
32.5 | 8 | 10 | 63 | 8 x 13 |
32.5 | 10 | 12 | 71 | 10 x 13 |
45.5 | 10 | 12 | 71 | 10 x |
BS Cutter & Key No. | Dia. of Cutters | Width of Cutter | Overall Length | Dia. of Shank |
---|---|---|---|---|
204 | 0.51 | 0.06 | 2 | ½ |
304 | 0.51 | 0.09 | 2 | ½ |
404 | 0.51 | 0.12 | 2 | ½ |
305 | 0.63 | 0.09 | 2 | ½ |
405 | 0.63 | 0.12 | 2 | ½ |
505 | 0.63 | 0.16 | 2 | ½ |
406 | 0.76 | 0.12 | 2.1/4 | ½ |
506 | 0.76 | 0.16 | 2.1/4 | ½ |
606 | 0.76 | 0.19 | 2.1/4 | ½ |
507 | 0.88 | 0.25 | 2.1/2 | ½ |
607 | 0.88 | 0.19 | 2.1/2 | ½ |
807 | 0.88 | 0.25 | 2.1/2 | ½ |
608 | 1.01 | 0.19 | 2.3/4 | ½ |
808 | 1.01 | 0.25 | 2.3/4 | ½ |
1008 | 1.01 | 0.25 | 2.3/4 | ½ |
609 | 1.13 | 0.25 | 2.3/4 | ½ |
809 | 1.13 | 0.31 | 2.3/4 | ½ |
1009 | 1.13 | 0.19 | 2.3/4 | ½ |
810 | 1.26 | 0.25 | 2.3/4 | ½ |
1010 | 1.26 | 0.31 | 2.3/4 | ½ |
1210 | 1.26 | 0.37 | 2.3/4 | ½ |
1011 | 1.38 | 0.31 | 3 | ½ |
1211 | 1.38 | 0.37 | 3 | ½ |
812 | 1.51 | 0.25 | 3 | ½ |
1012 | 1.51 | 0.31 | 3 | ½ |
1212 | 1.51 | 0.37 | 3 | ½ |