Function:

This unit is fully automatic way of mixing solder paste. The internal motor rotates and turns, which is the mixing concept. The solder paste mixer has several advantages over manual mixing, including the ability to arbitrarily regulate the direction and duration of stirring as well as the unchanging mixing speed.

Features:

1,Driven by high speed motor, fast speed and large torque;

2,Timer control, can set the mixing time;

3,Fully enclosed construction to ensure operator safety;

4,Adapt to the standard 500g solder paste bottles of various brands; stir 2 bottles in parallel;

5,The solder paste bottle does not need to be opened during the stirring process. stirred period about for 1-3 minutes.

6, Drive by electricity power only, no need air or other supply.

7,Mixing principle is on the basis of Motor rotation and revolution mode of agitation, no need to defrost the paste. Need to recovery the paste in short time, then the solder can be used after stirring well and deforming.

8,Process:Put in solder paste→Put the adapter on the other side→Close the lid and make sure there are no foreign objects inside the machine→Set the time→start →Automatic shutdown - take out7,Compatible With SMEMA interface which can be directly connected to other equipment.

Specification:

Function:

This unit is fully automatic way of mixing solder paste. The internal motor rotates and turns, which is the mixing concept. The solder paste mixer has several advantages over manual mixing, including the ability to arbitrarily regulate the direction and duration of stirring as well as the unchanging mixing speed.

Features:

1,Driven by high speed motor, fast speed and large torque;

2,Timer control, can set the mixing time;

3,Fully enclosed construction to ensure operator safety;

4,Adapt to the standard 500g solder paste bottles of various brands; stir 2 bottles in parallel;

5,The solder paste bottle does not need to be opened during the stirring process. stirred period about for 1-3 minutes.

6, Drive by electricity power only, no need air or other supply.

7,Mixing principle is on the basis of Motor rotation and revolution mode of agitation, no need to defrost the paste. Need to recovery the paste in short time, then the solder can be used after stirring well and deforming.

8,Process:Put in solder paste→Put the adapter on the other side→Close the lid and make sure there are no foreign objects inside the machine→Set the time→start →Automatic shutdown - take out7,Compatible With SMEMA interface which can be directly connected to other equipment.

Specification: