Submersible Winding Wire

Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

Having exceptional tear resistance, and excellent electrical, thermal and mechanical properties, these Submersible Winding Wires are available as per the defined industrial standards. Also, we cater....

View More Details

Send Enquiry

Product Details

Having exceptional tear resistance, and excellent electrical, thermal and mechanical properties, these Submersible Winding Wires are available as per the defined industrial standards. Also, we cater to the specific needs of the clients and manufacture these Submersible Winding Wires. On clientsâ�� demand, we produce the Submersible Winding Wire, having multi-stranded construction with a defined flexibility. The Submersible Winding Wire, we offer, is used by renowned Manufactures in their Submersible Pumps ranging from 0.5 H.P. to 250 H.P.
Why Our Submersible Winding Wires?

Outstanding Electrical, Mechanical, Thermal and Chemical properties
Tear resistant because of their bi-axial orientation
The multiple layer construction of these wires ensures high dielectric quality of insulation
Excessive stretching owing to the insulation, which adds significantly to the tensile strengths
These winding wires have passed test standards of IS: 8783 -2000 Part IV Sec -3.

Comparative Chart

Name of test	Value specified in standards for PVC insulated winding wire	Values obtained on Polywin (Polymer Insulated) winding wire	Remarks
Thickness of Insulation	0.35 mm	0.20 mm	Approx. 40% minitiarised
Heat shock test	The insulation shall not show any crack	Satisfactory	Ok
High Voltage test	To withstand 3KV(rms) for one minute	Withstood	Ok
Shrinkage test	The shrinkage shall not exceed 4%	3.5%	Ok

Insulation Resistance (VoltageResistivity) Ohm-cm

At 27°C	1.28 x 1013	6.18 x 1016	Far Superior
At 70°C	1.28 x 1013	55.03 x 1014	Far Superior
At 85°C	1.46 x 109	20.63 x 1014	Far Superior
At 100°C	1.46 x 109	41.27 x 1013	Far Superior

Comparative Chart

Sizem.m.	Resistanceohm/Km	Elongation(%)	250Vm.m.	WeightperKm	500Vm.m.	WeightperKm	1100Vm.m.	Weight perKm	3000Vm.m.	Weight perKm
0.40	136.63	30	0.15	1.30	0.200	1.50	0.30	1.90	0.40	2.30
0.50	87.96	31	0.15	2.05	0.200	2.25	0.30	2.65	0.40	3.05
0.60	60.92	32	0.15	2.85	0.200	3.05	0.30	3.45	0.40	3.85
0.70	44.78	33	0.15	3.85	0.200	4.05	0.30	4.45	0.40	4.85
0.80	34.34	33	0.15	5.00	0.200	5.20	0.30	5.60	0.40	6.00
0.90	27.10	35	0.15	6.20	0.225	6.50	0.30	6.80	0.40	7.20
1.00	21.96	36	0.15	7.70	0.225	8.00	0.30	8.30	0.40	8.70
1.10	18.15	37	0.18	9.30	0.225	9.50	0.30	9.80	0.40	10.20
1.20	15.26	38	0.18	10.90	0.225	11.10	0.30	11.40	0.40	11.80
1.30	12.96	38	0.18	12.80	0.225	13.00	0.30	13.30	0.40	13.70
1.40	11.20	38	0.18	14.70	0.225	14.90	0.35	15.20	0.45	15.60
1.50	9.74	40	0.18	16.90	0.250	17.20	0.35	17.60	0.45	18.00
1.60	8.58	40	NA	-	0.250	19.60	0.35	20.00	0.45	20.40
1.70	7.60	40	NA	-	0.250	22.00	0.35	22.40	0.45	22.80
1.80	6.79	40	NA	-	0.250	24.50	0.35	24.90	0.45	25.30
1.90	6.07	40	NA	-	0.250	27.00	0.35	27.40	0.45	27.80
2.00	5.49	40	NA	-	0.250	30.00	0.35	30.40	0.45	30.80
2.10	4.98	42	NA	-	0.250	32.80	0.35	33.20	0.45	33.60
2.20	4.54	42	NA	-	0.250	35.80	0.35	36.20	0.45	36.60
2.30	4.15	42	NA	-	0.300	39.80	0.40	40.20	0.50	40.60
2.40	3.81	42	NA	-	0.300	42.80	0.40	43.20	0.50	43.60
2.50	3.51	42	NA	-	0.300	47.10	0.40	47.50	0.50	47.90
2.60	3.25	43	NA	-	0.300	-	0.40	-	0.50	-
2.70	3.01	43	NA	-	0.300	-	0.40	-	0.50	-
2.80	2.80	43	NA	-	0.300	-	0.40	-	0.50	-
2.90	2.61	43	NA	-	0.300	-	0.40	-	0.50	-
3.00	2.44	43	NA	-	0.300	-	0.40	-	0.50	-
3.10	2.28	43	NA	-	0.300	-	0.40	-	0.50	-

Note : 250Volt grade for single phase pump, 500V for three phase pumps and 1100V & 3000V for high voltage and extra protection. sizes 0.55mm, 0.65mm, 0.75mm, 0.85mm, 0.95mm, 1.05mm, 1.15mm, 1.25mm, 1.35mm and so on are also manufactured and any other size can also be manufactured as per customer's specification.

Share your requirements for a quick response!