STUBEND LAP JOINT

Listing ID #3832484

Get Latest Price

Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

STUB END | LAP JOINT MANUFACTURER/EXPORTER IN INDIA | ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43 CARBON, ALLOY, STAINLESS STEEL LONG/SHORT PATTERN STUB ENDS/LAP JOINTS UNIFIT METALLOYS INC....

View More Details

Send Enquiry

Product Details

STUB END | LAP JOINT MANUFACTURER/EXPORTER IN INDIA | ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43 CARBON, ALLOY, STAINLESS STEEL LONG/SHORT PATTERN STUB ENDS/LAP JOINTS

UNIFIT METALLOYS INC is a leading India based manufacturer, exporter and supplier of high quality, high performance stub end (lap joint) fittings in all major grades and dimensions. Stub ends can be supplied in standard and non-standard ANSI dimensions. UNIFIT METALLOYS INC offers ex-stock supply of stainless steel stub ends, carbon steel stub ends, alloy steel stub ends and nickel alloy stub ends. Special length stub ends or lap joints can also be offered on demand.

Stub ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are mainly used with standard Lap Joint Flanges.

We manufacture and supply stub ends in various grades such as 304/304L, 304H, 316/316L, 321, 347, Duplex steel, 904L, Alloy 20, 317L and 310S. We supply stainless steel stub ends across various industry verticals such as power generation, oil and gas, petrochemical, chemical, fabrication and engineering, waste water treatment, and pharmaceutical industry.

STUB END/LAP JOINT PRODUCTION RANGE

Outside Diameter: 1/2″ – 24″
Type: Long/Short Lap Joint Stub Ends
Wall Thickness: 2mm – 100 mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXSS
Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel
Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

MANUFACTURING STANDARDS

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43

DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011

EN: EN10253-1, EN10253-2

ASTM A403 – ASME SA403: Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASME B16.9: Factory-Made Wrought Fittings Buttwelding
ASME B16.25: Buttwelding Ends ASME B16.28 Wrought Steel Short Radius Elbows and Buttwelding Returns
MSS SP-43: Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

STUB ENDS MATERIAL GRADES

Stainless Steel Stub End: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Carbon Steel Stub End: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Low Temperature Carbon Steel Stub End: ASTM A420 WPL3, A420 WPL6
Alloy Steel Stub End: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Duplex Steel Stub End: ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462
Nickel Alloy Stub End: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

MARKING & PACKING

Products are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All elbow fittings are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on our products.

QUALITY ASSURANCE

At Umifittings, all fittings and flanges are subject to strict inspection at each stage of the production process, from starting material purchasing to product dispatch. They are visually examined for conformity to ASTM, ASME, MSS, DIN, EN, and JIS codes and standards. Upon request, official certified Inspection Agencies can be called in to witness the material reports, dimensions and quality conformity of products.

Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

Company Details

Our brief introduction follows for your kind consideration. Unifit metalloys inc.(umi) an iso 9001 certified company is a sister concern of 20 years old m/s.madhuram metal corporation which is specializes in supply of pipes & tubes in semi wholesale market. To spread its wings in domestic & international market, unifit metalloys inc (umi) was founded by mr. Punit jain with vast & rich experience in these fields. We deal in ferrous metals. 1) stainless steel grades: ss304, ss304l, ss316, ss316l, ss316ti, ss310, ss321, ss 410, ss420, ss317, uns 32205, uns 32760 / 32750, uns 31803, 17-4 ph and 15-5 ph. 2) alloy steel and carbon steel • carbon steel pipes grades: astm a53 gr b, asme sa53 gr b, api-5l gr b, astm a106 gr b, asme sa106 gr b, astm a106 gr c, psl 1 and psl2, sa 179. • low temperature carbon steel pipes grade : astm a333 gr 6 and gr1 • alloy steel pipes grade: astm a335,a387 gr p1, p5, p9, p11, p12 & p22, astm a 213 gr.t-11, t-22 • carbon steel butt weld fittings grade: astm a234 gr.wpb, astm a420 gr.wpl6 • alloy steel butt weld fittings grade: sa 234 gr. Wp1, wp5, wp9, wp11, wp12, wp22, wp91 • carbon steel flanges grade: astm a105/105n & a350lf2,is 2062,spect blind. (sorf/wnrf/wnrtj/blrtj/ljff/soff/blrf) above material is avialable with original manufacture test certificate and ibr certificate form iiic 3) mild steel • pipes grade: is:1239 part I (1/2” to 6” nb – a class, b class or c class) , is: 3589 or gr.410 (6” nb and above as per required w.th.) , bs: 3059 p-1, gr.320 or bs: 3059 p-2, gr. 360 • plates grade: is 2062 gr a/b, astm a36, sa 516 gr.60/70, sa 517, sa 387. • flanges grade: sa 105 , a 234 wpb, wpl6, plate flange, spectacle binld flange (sorf/wnrf/wnrtj/blrtj/ljff/soff/blrf) forms: erw/efw,seamless pipe, sheets, plates, round bars, circles, pipe fittings (elbow,tee,cap,reducers,pipe nipples, weldolets, socolets,thredolets,stubend,forged fittings, ferrul fittings), flanges,weld overlay flanges,wire mesh and cladding plates. {product list attached for your ready reference} umi has large stock of above items and are available in ready stock and competitive price. Umi is open to third party inspection by all inspecting agencies. Umi is looking forward to supply you quality material with timely delivery & competitive price. Assuring you of our best services always.