Steel Billets

Ms ingots available from sail at cheapest prices as per the following specs:
common grades : is 2830, is 2831, sae 1070, en 8, en 9, sail tower, sailma, 20 mncr 5, is 1875, swr-14, sail hcr.
notes :
is 2830/2012: (1) min si content not less than 0.1% in silicon killed steel. (2) total micro alloying elements like nb, v and ti not to exceed 0.2%. (3) copper content shall be between 0.20 and 0.35%, if agreed. (4) all types of steel in above specification may be supplied in three grades a, b, & c, having sulphur, phosphorous (ladle analysis) and carbon equivalent as follows: grade a - sulphur and phosphorus each 0.05 max, ce 0.42 max; grade b - sulphur and phosphorus each 0.045 max, ce 0.41 max; grade c -sulphur
and phosphorus each 0.04 max, ce 0.39 max. Is 2831/2012: (1) semi finished steel products - such as blooms, billets, slabs which are fit for further processing. The dimension and tolerances for this product shall be as per mutual agreement. (2) micro alloying may be allowed subject to mutual agreement between the purchaser and the manufacturer. Micro alloying elements like nb, v or ti when used individually or in combination, the total content shall not
exceed 0.20 per cent. (3) while placing order the steel should be designated by ‘designation’. (4) copper may be present between 0.20 to 0.35 per cent as mutually agreed to between the purchaser and the manufacturer. The copper bearing quality steel shall be designed with a suffix cu, for example, c15 cu. (5) for grade c22, other requirements shall be as per relevant finished products standard. (6) in order to get
desired properties, the chemical composition may be mutually agreed to between the manufacturer and the purchaser conforming to stipulation is 2831.