STANDARD PLATING RECTIFIERS

Listing ID #3882401

a) MAIN TRANSFORMER: The transformer is wound with electrolytic copper conductors, class 'A’ insulation and conforms to IS 2026 in general. The laminations used are C.R.G.O. Silicon steel low less type. The wound coils are vacuum impregnaked, by using oven-baked varnish. 
b) I. P. T.: For high current units, transformer secondary is generally double vye, and an I. P. T. wound with copper is provided on the secondary to extend the conduction period of windings and diodes. 
c) SILICON RECTIFIER: The Rectifier is assembled by using silicon diodes mounted on heat sinks and connected in full wave circuit. Individual R. C. components are used for hole storage protection. The diodes assembly is always selected to have at least 40% extra rating above the max. Output current. 
d) REGULATOR: In order to facilitate voltage variation from zero onwards, a continuously variable voltage auto transformer conforming to IS 5142 is incorporated. The variacs are oil-cooled units and are used as independent units, or some times, accommodated in the transformer tank. Motorization is provided as optional feature. 
PROTECTIONS AND METERING: As a general protections on the input, an MCB and 3 nos fuses on the output of variac terminals are provided. 3 nos pilot indicators are incorporated on incoming side. 96 sq. cm. and an ammeter with suitable shunt are provided to read the output parameters. 
EXTRA FEATURES: For all the rectifiers used in continuous automatic, semi automatic plants, we can also incorporate special features as follows: 
1. Remote switching on by using contactors and bimetal overload relay. 
2. Push Button operation by motorization for variacs. 
3. Constant Voltage or Constant Current features using electronic circuits. 
4. Variac Zero start facility. 
5. Timers, time totalizers, ampere-hour meters etc. 
Descriptive literature and detailed maintenance instructions accompany every unit of ours, to expect trouble free service over long periods.