Galvanized Iron Duct, Certification : ISI Certified

GSS metal ducts as per IS-277 (120 GSM both sides, LFQ & confirming to Class VIII) for GS Sheets and IS-655 for fabrication of 22/24 swag thicknesses including necessary G.I. hangers/ supports, volume control duct dampers, accessories, vanes, 3 mm neoprene rubber gasket etc. complete as per specifications in accordance with the approved shop drawings. Ducts to be sent in Factory fabricated Boxed Format the job site. The factory fabricated ducts shall be as per approved make list only.
Thermal Insulation
GI ducts complete with Closed Cell foam with minimum density of 60 Kg/m3 with minimum R-Value 4.1/inch & thermal conductivity -0.035 w/mock confirming to Class ‘O’ & the inner side stuck to the outer fascia of the GI ducts with recommended / Proprietory Synthetic adhesive bonding (SR998 or equivalent) & installed as per manufacturers recommendation and finished with vapour barrier with Lagging and covered with glass cloth with mechanical protection for ducting without puncturing the vapour barrier complete as per specifications. Lag coating AF5590 shall be used as the vapour barrier and as the protective covering of glass cloth and shall be UV protected.