Listing ID #3776049
Company Information
Ask for more detail from the seller
Contact SupplierWe are stockits and suppliers of stainless steel with precipitation hardening 17/4PH, duplex and super duplex grades. Austenitic, martensitic and ferritic specifications stocked in a large range of shapes and sizes.
Reliable stock a wide range of engineering steels including carbon steel and alloy steel, key steel, Titanium, Tantalum, Nickel, Cupro - nickel, Zirconium, Hastelloy, Incolloy, HR Alloy, Alloy 20, Monel, Inconel, stainless Steel, Niobium, Nimonics, Duplex and Spring Steel products.
All grades can be supplied as bar, plate, sheet or cut from block. Non standard sizes can be produced as steel forgings.
Â
GRADE | Duplex Alloy 19D | Duplex Alloy 2205 | Super Duplex Alloy 2507 | Alloy: 250 SMO Nominal Composition in Percent: |
UNS No. | S32001 | S31803 | S32750 | Ni 18.00 |
Carbon | 0.030 max. | 0.03 max. | 0.030 max. | Cr 20.00 |
Manganese | 4.0 min. / 6.0 max. | 2.00 max. | 1.20 max. | Mo 6.25 |
Phosphorus | 0.040 max. | 0.030 max. | 0.035 max. | Fe 53.00 |
Sulfur | 0.030 max. | 0.020 max. | 0.020 max. | Si 0.80 |
Silicon | 1.00 max. | 1.00 max. | 0.80 max. | Mn 1.00 |
Chromium | 19.50 min. / 21.50 max. | 21.00 min. / 23.00 max. | 24.00 min. / 26.00 max. | C 0.020 |
Nickel | 1.00 min. / 3.00 max. | 4.50 min. / 6.50 max. | 6.00 min / 8.00 max. | Cu 0.75 |
Molybdenum | 0.600 max. | 2.50 min. / 3.50 max. | 3.50 min / 5.00 max. | P 0.030 |
Nitrogen | 0.050 min. / 0.170 max. | .08 min. / .20 max. | 0.24 min / 0.32 max. | S 0.010 |
Copper | 1.00 max. | *** | 0.50 max. | N 0.20 |
Grade |
USA |
U.K |
Germany |
Japan |
China GB |
ASTM |
BS |
DIN |
JIS H |
BFe10-1-1 |
C70600 |
CN102 |
CuNi10Fe1Mn |
C7060 |
BFe30-1-1 |
C71500 |
CN107 |
CuNi30Mn1Fe |
C7150 |
HAL77-2 |
C68700 |
CZ110 |
CuZn22Al |
C6870 |
HSn70-1 |
C44300 |
CZ111 |
CuZn28Sn1 |
C4430 |
H68A |
C26130 |
CZ126 |
----- |
----- |
Remark: Subject to the buyer's appointment. |
Description |
Grade |
Size (mm) |
Rolled Seamless Tube |
GR1 GR2 GR3 GR7 GR9 GR12 GR16 GR17 |
OD(3-114)*WT(0.2-6.0)*L |
Seamless Tube |
GR1 GR2 GR3 GR7 GR9 GR12 GR16 GR17 |
OD(10-159)*WT(0.5-5.0)* |
Extruded Tube |
GR2 |
OD(25-210)*WT(6.0-30) *L |
CDM Provide following chemical and mechanical testing types for Ti TUBE |
||
Chemical composition |
Ultrasonic Fracture |
Elongation |
Visual Inspection |
Eddy Current Fracture |
Flattening |
Annealing |
Annealing |
Flaring |
Dimensional inspect |
Tensile and Yield |
Hardness |