Solar Street Lighting System

Light up the streets directly from the solar energy by installing this Solar Street Lighting System. The Solar Street Lighting System, which we offer, is manufactured as per the set industrial standards. This Solar Street Lighting System consists of all the components of high-quality. We are a credible Manufacturer, Supplier and Exporter of Solar Street Lighting System. Scope : This Specification Covers The General And Technical Requirement Of LED Based Stand-Alone Solar Photovoltaic Street/Security Lighting System For Uninterrupted Illumination Of The Street, Pathways & Surroundings Of The Buildings From Dusk To Dawn For Security & Safety. System Description : Solar Photovoltaic (SPV) LED Based Security/Street Lighting System Consists Of The Following Elements :

• SPV Module to Convert Solar Radiation Directly into Electricity with 20 year warranty (Mono Crystalline)
• 6 M Long MS 2.5â�� Pole 5 M above Ground Level with corrosion paint
• Battery Bank To Store The Electrical Energy Generated By SPV
• Panel during Day Time
• Charge Controller to Maintain the Battery To The Highest Possible
• State Of Charge (Soc) While Protecting The Battery From Deep
• Discharge (By the Loads) or Extended Overcharge (By the PV Array)
• Bright White LED Luminary as A Light Source
• Interconnecting Wires/Cables & Hardware
• Polycarbonate Suitable Battery Box For The Battery Protection
• Durable ABS Luminary With Inbuilt Indications
• 5-year Warranty Scheme
• Bird Spikes to Avoid Bird Sitting On the Solar Module at the Highest Point of the Array/Module
• Structure

• The System Is Designed To Have 2 To 3 Days Autonomy (I.e. System Will Work For 2 To 3 Consecutive Days Without Charging From The Panel)
• All Wiring, Enclosures And Fixtures That Are Mounted Outdoor Are Resistant To High Humidity Conditions, Corrosion, Insect And Dust Intrusion.
• The Solar Module For The Purpose Of This Specification Shall Consist Of The Following Four Main Components.
• An Assembly Of Suitable Inter-Connected Crystalline Silicon Solar Cells.
• Toughened, High Transitivity Glass In Front Side Of The Module For Improved Visibility &Protection Against Environmental Hazards, Such As Rain, Hail & Storm And Weather Proof TEDLA/POLYSTER Back Sheet.
• The Transparency Of Toughened Glass Used Shall Be >91%, When Measured In Actual Sun Light By Placing the Glass Plate Perpendicular To The Sun Rays Through An Air Mass Of 1.5
• The Complete Solar Module Is Ensured For Water-Proof Sealing In An Anodized Aluminum Frame.
• The Output Terminals Of The Module Will Be Provided On The Back Of The Solar PV Module.
• Terminal Block Will Be Made Of Nylon-6 Or Equivalent With Weather Proof Design And Also
• Having A Provision For Opening For Replacing The Cables If Required.
• Ultra modern design of the light fixture.
• All Metal Equipment Cases And Frames In The System Will Be Well Grounded.
• The System Will Be Virtually Maintenance Free (Except For Cleaning The Top Glass Of The Solar Panel Depending On Dust Conditions At The Place Of Installation)