Listing ID #4653742
Company Information
Ask for more detail from the seller
Contact SupplierDPC series single-stage impact hammer crusher is one of the leading products in our company which is widely used to crush limestone stones with medium hardness compressive strength under 200 Mpa and calcium content higher than 40%.
Advantage Feed PortBig feed port makes high charging rate.
Hydraulic Traction BarRear cover could be opened by hydraulic traction bar easy to change impact plate and easy to maintain.
Observation DoorWhen machine shut down service condition could be observed.
Effecient and Energy-SavingSingle stage and high capacity.
Working principleDPC series single-stage impact hammer crusher is composed of rotor bearing part discharge dandruff comb strike plate and shell. Hammer of the crusher strikes ore stone ore stone hits impact plate and ore stone impacts each other these are the principle of single stage hammer crusher. Ore stone is fed to feed port by feeder then it will fall into crushing cavity where there are two relative rotating rotors and impacted by hammer to get preliminary crushing. Material will be secondly crushed by rotor and impact plate in the process of falling down then shunted by strike plate to go two mutual symmetry discharge area finally standard material will be discharged by bottom of the machine.
Product introductionDPC series single-stage impact hammer crusher is one of the leading products in our company, which is widely used to crush limestone, stones with medium hardness, compressive strength under 200 Mpa and calcium content higher than 40%. It can crush the big size ore to the small size ones which can be directly fed to the grinding mill, thus replace the traditional two-stage crushing, simplify the process, save infrastructure investment and production cost.
Model
Rotor Diameters (mm) | Hammerhead quantity (Pcs) | Feed size (mm) | Max.Feeding Size (mm) | Output Size (mm) | Capacity (t/h) | Power (KW) | Total Weight (t.excluding motor) | Model of Motor | |
DPC14.12 | Φ1420×1194 | 26 | 1290×1320 | 600×600×900 | ≤25mm | 70~120 | 200 | 23.5 | YR355-6 |
DPC16.16 | Φ1650×1630 | 28 | 1500×1785 | 800×800×1200 | ≤25mm | 150~220 | 355 | 43 | YRKK500-6 |
DPC18.18 | Φ1850×1730 | 40 | 1755×1780 | 800×800×1000 | ≤25mm | 240~350 | 560 | 67.5 | YRKK500-6 |
DPC20.18 | Φ2020×1802 | 40 | 2040×1860 | 1000×1000×1000 | ≤25mm | 350~450 | 710 | 89 | YRKK560-6 |
DPC20.22 | Φ2018×2227 | 50 | 2288×2460 | 1000×1000×1200 | ≤25mm | 400~600 | 800 | 110 | YRKK560-6 |
DLPC20.22-1 | Φ2018×2227 | 50 | 2288×2460 | 1000×1000×1500 | ≤25mm | 600~800 | 800 | 120 | YRKK560-6 |
DLPC20.22-2 | Φ2018×2227 | 50 | 2288×2460 | 1000×1000×1500 | ≤25mm | 700~900 | 800 | 130 | YRKK560-6 |
2DPC18.18 | Φ1850×1890 | 2×36 | 2030×2080 | 1000×1000×1200 | ≤75mm | 700~1000 | 2×630 | 119 | YRKK560-6 |
2DPC20.22 | Φ2018×2238 | 2×50 | 2670×2460 | 1000×1000×1500 | ≤75mm | 1200~1500 | 2×800 | 147 | YRKK560-6 |
2DPC23.25 | Φ2300×2508 | 2×66 | 3065×2666 | 1100×1100×1500 | ≤75mm | 1200~1600 | 2×1120 | 204 | YRKK6302-6 |