Company Information
Member Since 8 Years
Nature of Business Manufacturer
GST No. 24ABOFS9916Q1Z4Ask for more detail from the seller
Contact Supplier
Type
SILK Interior Emulsion provides a luxurious finish and a silky glowing appearance to the wall.
Features
SILK Interior Emulsion is water based, Economical interior emulsion for distinctly rich and smooth finish as compared to distemper. Ideal combination of pigments & extenders mixed in a co-polymer emulsion for smooth and pleasant matt finish with Good washability.
Recommended Application
SILK Interior Emulsion is an interior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.
Remarks
Kindly refer to the MSDS for the saffro mellow coatings & resins SILK interior emulsion which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
| No | PRODUCT | THINNER | Dilution % by Vol | Application Viscosity in Sec | Recoating Period (Hrs) |
|---|---|---|---|---|---|
| 1 | Sand the surface with emery paper No.180 and wipe | ||||
| 2 | Saffro’s Cement (Water or Solvent based) Wall Primer | MTO or Water | B- 8-10, S- 15-20 | B-30-40, S-20-25 | 6-8 hrs |
| 3 | Saffro’s Wall Putty | Water | Small amount of water flow | 4-6 hrs | |
| 4 | Sand the Surface with emery paper 180 and Wipe | ||||
| 5 | Saffro’s Cement(Water or Solvent based) Wall Primer | Water or MTO | B- 8-10, S- 15-20 | B-30-40, S-20-25 | 6-8 hrs |
| 6 | Sand the surface with emery paper No. 320 and wipe | ||||
| 7 | Saffro’s STAR velvet glow emulsion by Brush, Spray, Roller | Water | B-40-45, S-65-70 | B-30-45, S-20-25 | 3-4 hrs |
| 8 | Saffro’s STAR velvet glow emulsion by Brush, Spray, Roller | Water | B-40-45, S-65-70 | B-30-45, S-20-25 | 3-4 hrs |
| 9 | (B=Brushing, S=Spraying) | ||||
| 11 | Safety Features : | Non-flammable | |||
| 12 | Pack Sizes: | 1 Litre, 4 Litre, 10Litre, 20 Litre. |
Connect with us
For Buyer 
For Seller 
Help 
Ahmedabad, Gujarat 
Send Enquiry