Wacker Silicone Emulsion

Listing ID #5234615

WACKER SILICONE HS emulsion is a water dilutable release  agent  having  20%  dimethyl  polysiloxane  to-gether  with  non-fugitive, essentially  non-ionic  emulsi-fier. It is an effective and widely used release agent for rubber.
WACKER  SILICONE  HS  provides  following  advan-tages   over   conventional   dimethyl   polysiloxane emulsions :

• Imparts  excellent  shinning  on  natural  rubber  sur-face and also on EVA sheet. 
• Excellent mould release agent for rubber.
  
• Leaves  no  tarry,  carbonaceous  residue  on  the mould. 
• Has good emulsion stability, both as supplied and in diluted form. 
• Stable  at  temperatures  as  high  as  50ºC  and  as low as 0ºC.

• Low cost.

Storage and Shelf Life
WACKER  SILICONE  HS  must  be  used  within  one year  from  the  date  of  manufacturing.  To  preserve  all the properties of METROARK HS, the following condi-tions must be met - 

• Keep  the  original  packs  closed  and  at  temperature of 30ºC but not lower than 0ºC.
• Use the products on opening the packs.

Applications
Shining of rubber surface

• Rubber  Slipper : WACKER  SILICONE  HS imparts  excellent  shining  on  rubber  strip  as well as inner surface of the slipper. It can be applied by simple brushing on the rubber sur-face.  Best result is obtained when WACKER SILICONE HS is used in 1:1 ratio with water.
• Bicycle  Tyre : WACKER  SILICONE  HS  cre-ates a bright shine on bicycle tyres. Here, it is used in the ratio of 1:1 with water.

As a Release Agent

• Slipper Sheet (Hawai   Sheet) : Generally, Sheet dimension is 6mm to 12mm thick having  area  36"x  36".   WACKER  SILICONE  HS gives  excellent  release  of  the  sheet  from  the mould. For better release, fresh coating is required   every   time   on   the   mould   surface. Coating can be applied by spraying in the ratio 1:5 with water.
• Micro  Cellular  Sheet :  This  sheet  is  required for lower portion of slippers. Sheet dimension is 1mm to 8mm thick having area 36" x 36" or 30"  x  30".  Here,  WACKER  SILICONE  HS  is used as a release agent from the mould. Application process is similar to Slipper sheet as above.
• Banwar  Sheet :  This  sheet  is  necessary  for upper portion of the slipper. Sheet dimension is almost 1mm to 8 mm thick having area 36" x  36"  or  30"  x  30".  Here,  WACKER  SILI-CONE  HS  is  used  as  a  release  agent  from the  mould.  Application  process  is  similar  to Slipper sheet as above. 
• Bicycle paddle and brake shoe : WACKER  SILICONE  HS  is  used as  a mould release  agent  and  can  be  used  directly  or  in 1:1 ratio with water.
• Bicycle  tyre :  WACKER  SILICONE  HS  is  an effective  release  agent  in  the  manufacturing of  bicycle  tyre.    WACKER  SILICONE  HS  is being used directly or in 1:1 ratio with water.
• EVA  Sheet :  For  the  manufacture  of  EVA sheet, WACKER  SILICONE  HS  is used  as a release     agent.     For     effective     release, WACKER  SILICONE  HS  can  be  used  in  1:5 ratio with water. 

Product Safety
When  considering  use  of  any  Metroark  product  in  a particular  application,  you  should  review  our  latest Material  Safety  Data  Sheets  and  ensure  that  the  use you  intend  can  be  accomplished  safely.  For  Material Safety  Data  Sheets  and  other  product  safety  informa-tion,  contact  Metroark  Sales  Office  nearest  to  you. Before  handling  any  other  products  mentioned  in  the text,  you  should  obtain  available  product  safety  information  and  take  necessary  steps  to  ensure  safety  of use.
Notes :

• Preventing growth of fungus.
• Footwear – Sandal.
• Ethyl Vinyl Acetate – substitute for rubber in sandals