Listing ID #5952224
Company Information
Ask for more detail from the seller
Contact SupplierSILICO READY MIX PLASTER is a polymer-modified premixed cement-based plaster. It is convenient, easy to use, strong and binds better to its substrate. It provides an even surface on which tiling can be done faster & efficiently. READY-MIX PLASTER is specially formulated using graded sand to impart compactness to the plaster. It also contains special polymers which reduce re-bonding losses, thereby increasing the productivity of the labor and has a water-retaining component which reduces the curing requirement of the plaster, when compared to the conventional method.
ADVANTAGES
Consistent quality
Ready Mix Plaster
Ready Mix Plaster is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives. It is supplied as dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.
Ready Mix Plaster is used for masonry, civil repair, plastering on inner and outer walls. It can be used on brick, block, stone walls as well as concrete surfaces.
METHOD OF APPLICATION
SURFACE PREPARATION
Surface should be clean, sound and free from loose material, grease, oil paint etc. Prior to Ready Mix Plaster application, soak the entire surface with clean water.
MIXING
Ready Mix Plasters with 12-13 % water by weight of the material. Stir for 2-3 min, to have a consistency free of lumps.
APPLICATION
Ready Mix Plaster can be applied by normal masons just like the conventional method.
CURING
In general, no curing is required for Ready Mix Plaster. However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from applied surface.
PACKAGING & STORAGE
40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.
SAFETY
Use of dust mask, safety goggles and gloves are recommended.
Points | Ready Mix Plaster | Conventional Mortar |
---|---|---|
Raw Material(Sand & Cement) | Consistent quality | Inconsistent quality |
Mixing Ratio (Sand & Cement) | Fixed | Will always very at different times |
Finish | Smooth | Rough |
Wastage | Minimum wastage(3-5%) | Heavy wastage in shifting, sieving of raw material & application of plaster (15-20%) |
Consumption | 0.17/kg.sq.ft./mm on brick wall, 0.13/kg.sq.ft./mm on AAC block wall | 0.35/kg.sq.ft.mm |
Curing | Almost no curing (only 1 curing required after 24 hours of plastering) | Extensive curing required |
Cracks | Negligible shrinkage cracks | Shrinkage cracks are observed |
Manpower | Less as ready to use mortar & almost no curing | Practically higher for raw material processing application & curing |
Edges | Sharp edges possible | Sharp edges not possible |
Space Constraint | Easy to carry in narrow streets, plastering can be done very conveniently in any circumstances/weather | Separate space needed for keeping sand & cement |
Stock taking | Easy to count & reconcile as available in bags | Very difficult |
Paint Finish | Quality and life of paints are enhanced | Average & inconsistent |
Quality | Consistent | Irregular |
Apnaghar Bizcorp Private Limited is one of the most eminent names in the market of Udaipur. The company is involved in supplying the best quality mild steel products, CPVC pipes & fittings, cement, ready mix plaster, binding wires, concrete blocks, TMT bars, and many more. We offer several types of mild steel products such as mild steel pipes, mild steel flats, mild steel beams, mild steel channel, and mild steel angle. Our mild steel products are best known for their supreme quality, great finish, and strength. We provide many CPVC pipes & fittings like Jain CPVC pipes and fittings, Jain CPVC brass pipes and fittings, Ashirvad CPVC pipes and fittings. Our CPVC pipes & fittings are appreciated for their reliable performance. All the products that we are offering are available in high-grade packaging materials.
Apnaghar Bizcorp Private Limited is an Udaipur (Rajasthan, India) based company, which was incorporated in the year 2004. The company is doing well under the guidance of experienced mentors.
Why Choose Us?
Working in the industry for more than 16 years, we have been able to provide the best quality products according to the needs of the customers. In addition to this, we are also known for our timely delivery services and wide range of products.