Listing ID #4857295
Company Information
Ask for more detail from the seller
Contact SupplierSelf Priming Mono Block pump sets manufactured by Mak Pump Industries are best suitable to get the corporation or Municipality supplied water through pipe line. The suction capacity is 6 M Self Priming Mono Block pumps are used for pumping out water from minor tube well also. The pumps are available in 0.5HP(0.37KW) and 1.0 HP(0.75KW) The head range is from 6 M to 55 M depending upon the rating. These are high speed pumps.(Speed is 3000 RPM- Synchronous) Also super suction pumps are available which are front suction type. Available in 0.5 HP( 0.37KW) and 1.0HP(0.75KW) Shallow Well Jet Pumps: Available for lifting water from shallow well. Has a suction capacity of 8.5 M Available in 0.5 HP(.37KW) and 1.0 HP(0.75KW).
Name of Parts | Material Composition | |
1 | Motor Bush | LTB – 4 Grade as per IS : 318 |
2 | Thrust Plate | Assam Carbon |
3 | Rotor | ” Grand Polycot ” Make Epoxy Coated Rotor |
4 | Stamping | Low – Loss Electrical Stamping ( Highly Efficient ) |
5 | Thrust Bearing | S.S 304 IS : 1570 Part V |
6 | Rotor Sleeve / Shaft | S.S 410 IS : 1570 Part V |
7 | Bowi – impeller Set | Poly Carbonate GNF 2 : 25 % Glass Filled |
8 | Pump – Motor Shell | S.S. 202 / 304 IS : 1570 Part ll Redpectively |
9 | Pump MOtor Casting Parts | FG 200 as Per IS : 210 |
10 | PumpSleeve | Hard Choromed and SS : 410 as per IS : 1570 Part V |
11 | Pump Bush | Nitrile Rubber and LTB – 4 Grade as per IS : 318 |
12 | Winding Wire | Warpimg ( Coated ) and PVC as per IS |