Listing ID #3850589
Company Information
Ask for more detail from the seller
Contact SupplierExperienced and actual users, keeping in mind most rigorous working environment, designed our machine with extensive calculations of stresses and loads on every component. This has created a robust machine with adequate safety factors and with minimum power requirement. It saves upon the electricity consumption, thus effective running cost.
All components are suitably machined to provide true alignment, which gives a better-finished product. True alignment also enhances the longevity of the machine eliminating breakdown and revenue loss.
Use of Helical gears, which has better load bearing capacity as compared to Spur Gear, which enhances the longevity of the machine eliminating breakdown and revenue loss.
Machine is equipped with dynamically designed support roll system, which arrests the skewing of the machine, which again increases the longevity of the machine eliminating breakdown and revenue loss with a better finished product.
Only maintenance required is oiling at various points.
Along with our machine we provide the following test and guarantee certificates
1. Test certificates for the material used.
2. Ultrasonic test certificate for the forgings used.
3. Guarantee and test certificate for the motor used.
4. Guarantee and test certificate for the Gear Box used.
5. 12 months warranty for our product
Description | Model | ||||||||
---|---|---|---|---|---|---|---|---|---|
HM-25 | HB-40 | HBH-40 | HB-50 | HBH-50 | HBD-50 | HBD-85 | HBD-120 | HBD-150 | |
Pipe | 25 x 2 | 35 x 3 | 35 x 3 | 45 x 4 | 45 x 4 | 45 x 4 | 75 x 6 | 100 x 6 | 140 x 5 |
Round Tube | 32 x 1 | 40 x 2 | 40 x 2 | 50 x 2 | 50 x 2 | 50 x 2 | 85 x 3 | 120 x 3 | 160 x 3 |
Square Tube | 30 x 1 | 35 x 2 | 35 x 2 | 40 x 2 | 40 x 2 | 40 x 2 | 70 x 3 | 90 x 5 | 100 x 5 |
Angle Iron | 30 x 3 | 35 x 5 | 35 x 5 | 45 x 6 | 45 x 6 | 45 x 6 | 85 x 6 | 100 x 10 | 120 x 6 |
Solid Round | 22 | 32 | 32 | 35 | 35 | 35 | 60 | 70 | 80 |
Solid Square | 19 | 28 | 28 | 35 | 35 | 35 | 50 | 60 | 70 |
Flat Bar | 50 x 6 | 50 x 10 | 50 x 10 | 60 x 10 | 60 x 10 | 60 x 10 | 80 x 20 | 100 x 20 | 100 x 25 |
T Shape Angle | 30 x 3 | 35 x 5 | 35 x 5 | 45 x 6 | 45 x 6 | 45 x 6 | 85 x 6 | 100 x 10 | 120 x 6 |
C Channel | 20 x 10 | 40 x 20 | 40 x 20 | 60 x 30 | 60 x 30 | 60 x 30 | 80 x 45 | 100 x 50 | 125 x 65 |
Upper Roll Dia. | 100 | 130 | 130 | 150 | 150 | 180 | 250 | 315 | 390 |
Lower Roll Dia. | 115 | 130 | 130 | 150 | 150 | 180 | 250 | 315 | 390 |
Roll Adjustment | Manual | Manual | Hydraulic | Manual | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic |
Pinch | Single | Single | Single | Single | Single | Double | Double | Double | Double |
Driven Rolls | Two | Two | Two | Two | Two | Two | Two | Three | Three |
Speed RPM | N.A. | 15 | 15 | 15 | 12 | 11 | 5 | 5 | 3 |
Power HP | N.A. | 2 | 2 | 3 | 3 | 3 | 5 | 10 | 15 |
Weight Kgs. | 210 | 370 | 460 | 580 | 690 | 930 | 1620 | 2250 | 4550 |
OPTIONAL ACCESSORIES | STANDARD ACCESSORIES | APPLICATIONS |
---|---|---|
1. OPTIONAL ROLLS DEPENDING UPON THE | 1. SM Series : One Set of Roll Tool, Screw Operating Rod, Handle, Nut Spanner & Storage Cabinet. | 1. ELECTRIC PANNELS |
2. CROSS SECTION TO BE BEND | 2. SB Series : One Set of Roll Tool, Gear Box, Electric Motor, Control Panel, Screw Operating Rod & Nut Spanner. | 2. ROOFINGS |
3. SBH Series : One Set of Roll Tool, Gear Box, Hydraulic Unit, Electric Motors, Pressure Gauge, Control Panel, Screw Operating Rod & Nut Spanner. | 3. BUS BODIES | |
4. SBD Series : One Set of Roll Tool, Gear Box, Hydraulic Unit, Electric Motors, Pressure Gauge, Control Panel, Screw Operating Rod & Nut Spanner.. | 4. KITCHEN EQUIPMENTS | |
5. GENERATOR ENCLOSURES | ||
6. & Motor Pulley | ||
7. STAINLESS STEEL EQUIPMENT’S | ||
8. COIL CUTTING INDUSTRIES | ||
9. AIR CONDITION DUCTS | ||
10. CONTAINER MANUFACTURING | ||
11. FLOUR MAKING MACHINES | ||
12. INDUSTRIAL STRUCTURES | ||
13. RAIL COACHES | ||
14. TIPPER TRUCKS | ||
15. WIND MILL MANUFACTURING | ||
16. TURNINE ENCLOSURES |