Rubber Sealing Rings

While drinking a glass of water are we aware of how it got to our glass? What channels it had to pass to make sure we get safe drinking water? Are we sure the water is safe and healthy?

We at Holdwell Components are a part of that channel that’s ensures in providing safe drinking water.

We manufacture rubber sealing rings used for drinking water application. Our goal is to ensure a leak proof solution to the industry as we know the importance of preserving water.

We have a wide range of rubber gasket of different designs for ductile iron pipe and pipe fittings. The gaskets are available in sizes 3” – 24”, and with a rating of 350 psi they will meet or exceed the capabilities of ductile iron pipe, valves and fittings. Our product is accredited by Water regulation advisory scheme (WRAS) , EN 681-1 (KITEMARK), ACS (FRANCE) and BIS .

We have a technical team which specializes in designing complex compounds which ensure the safety of impact of water on human health.  We have our in house development facility for developing new compounds and products which contributes to the industry. Our goal here is to provide sustainable growth to the society and ensure that “every drop counts”.

We have a wide range of rubber gasket of different designs for ductile iron pipe and pipe fittings. Our product is accredited by Water regulation advisory scheme (WRAS), EN 681-1 (KITEMARK), ACS (FRANCE) and BIS.

Application:  tyton gasket also know as push on gasket is used as a sealing solution for ductile iron pipe used for the transmission of drinking and sewerage water.

Benefits:

1. Does not contaminate the quality of water.
2. 100% leak proof.
3. Ozone and crack resistance.
4. Weather resistance.
5. Longer durability.
6. Excellent performance.

Features:

The gasket comes in EPDM/SBR and NBR rubber.

The design of the gasket has 2 different variety of compound. The HEEL part of the gasket is of HARDNESS 80(IRHD) which holds the pipe and the BULB part with hardness 50 (IRHD) provided the sealing function.

RANGE:- 80mm to 1600mm

• Application:- SAME AS ABOVE
• BENIFIT SAME AS ABOVE
• HARDNESS 60,
• Range:- 80mm to 1000mm

• Application:-same as above
• Key features:- same as above
• Size:- 80mm to 1000mm
• Hardness 70

1. For ductile iron application utilizing (Please Mention Pipe specifications)
2. In cold weather assembly maintain the temperature of the gasket above 40° F.
3. The socket of the joint should be clean and free of debris or significant corrosion.
4. Gasket should be properly seated in the bell socket.
5. Keep the pipe and joint in alignment during assembly. If installed out of alignment, the gasket can be pushed out of position, creating the potential for leaks or failure.
6. If deflection is wanted in the joint deflect before fully inserting the joint
7. Some extension of the joint will occur when pressurized. To avoid this, the joint should be pulled out after assembly to “set” the stainless-steel teeth in the inserted pipe.
8. Once assembled, the joint can be disassembled using steel shims.
9. Do not reuse, as they may have been damaged during any previous installation or during removal.
10. Do not use to conduct electricity through the pipe joint, as they could be damaged and fail.
11. Do not use in above ground applications.
12. Do not use with thick coatings on the pipe exterior