DESPAN ZERO ZERO Rubber Blanket is used in textile finishing for pre-shrinking the cloth.It is shrinking shirting light weight fabrics Twills, Drills, Wollen Silk, Terry Cotton, Polyester and Denium.
DESPAN ZERO ZERO Rubber Blanket has a width varying from 122 cms to 350 cms. The thickness varies from 50 mm to 75 mm. The hardness being 37+ 3 shore A and has a standard circumference of 3962 mm. It withstands temperature commensurating to the steam pressure of 3kg/Cm2 in the drum. DESPAN ZERO ZERO Rubber Blanketis processed out of best quality rubber free from foreingn particals.
Recommendation for Maintenanace Precautoins

Do not allow blanket surface come in contact with floor, crates or equipment.

Do not handle blanket with chains, cables, hooks or small diameter bars when installing, removing or crating.

Do not apply steam to drum until water cooler lines have been turned on and blanket is moving.

Do not increase tension on the blanket beyond minium required to eliminate slippage.

Do not release blanket tension at shut down.

When the machine is not in use, the blanket should not be kept in contact with hot surface.

It is advisable to use minimum steam pressure in order to have better life of the blanket.

Excessive steam pressure reduceslife of rubber blanket and increase necessity of frequent grinding.

It is advisable to adjust pressure roll after each grinding.
GRINDING
It is recommended that blanket be reground after one million metres of cloth or every 120 hours of operation. The rubber removed in grinding should be 0.5 to 1 mm. to get fresh lively surface. Grinding prolongs the life of the blanket by removing minor defects before these develop into serious ones under friction and excess heat should be avoided.
Telcum or soap stone powder should be used while grinding to avoid generation of heat.
STORAGE
The rubber should be carefully removed from its case and should be kept on edge in upright cylindrical from. If the has been in the case for a considerable length of time it may be necessary to use spool or large diameter pipe to obtain the circle or cylinder form.
DESPAN maintains a high degree of specialisation and supports its customer through the realization of high product and service objectives.

DESPAN ZERO ZERO Rubber Blanket is used in textile finishing for pre-shrinking the cloth.It is shrinking shirting light weight fabrics Twills, Drills, Wollen Silk, Terry Cotton, Polyester and Denium.
DESPAN ZERO ZERO Rubber Blanket has a width varying from 122 cms to 350 cms. The thickness varies from 50 mm to 75 mm. The hardness being 37+ 3 shore A and has a standard circumference of 3962 mm. It withstands temperature commensurating to the steam pressure of 3kg/Cm2 in the drum. DESPAN ZERO ZERO Rubber Blanketis processed out of best quality rubber free from foreingn particals.
Recommendation for Maintenanace Precautoins

Do not allow blanket surface come in contact with floor, crates or equipment.

Do not handle blanket with chains, cables, hooks or small diameter bars when installing, removing or crating.

Do not apply steam to drum until water cooler lines have been turned on and blanket is moving.

Do not increase tension on the blanket beyond minium required to eliminate slippage.

Do not release blanket tension at shut down.

When the machine is not in use, the blanket should not be kept in contact with hot surface.

It is advisable to use minimum steam pressure in order to have better life of the blanket.

Excessive steam pressure reduceslife of rubber blanket and increase necessity of frequent grinding.

It is advisable to adjust pressure roll after each grinding.
GRINDING
It is recommended that blanket be reground after one million metres of cloth or every 120 hours of operation. The rubber removed in grinding should be 0.5 to 1 mm. to get fresh lively surface. Grinding prolongs the life of the blanket by removing minor defects before these develop into serious ones under friction and excess heat should be avoided.
Telcum or soap stone powder should be used while grinding to avoid generation of heat.
STORAGE
The rubber should be carefully removed from its case and should be kept on edge in upright cylindrical from. If the has been in the case for a considerable length of time it may be necessary to use spool or large diameter pipe to obtain the circle or cylinder form.
DESPAN maintains a high degree of specialisation and supports its customer through the realization of high product and service objectives.