Round Stainless Steel 904L Pipes, for Industrial Use, Length : 5ft

Listing ID #1917304

Get Latest Price

SpecialitiesAnti Corrosive, Durable, High Quality
MaterialStainless Steel
ShapeRound
Thickness0.5-1mm
Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location India, South Africa, United States, United Arab Emirates, United Kingdom

View More Details

Product Details

Specialities Anti Corrosive, Durable, High Quality
Material Stainless Steel
Shape Round
Thickness 0.5-1mm
Length 5ft
Usage Industrial Use
Dimension 0-15mm

These Stainless Steel 904L Pipes are high-alloy systematic stainless steel with low carbon content. They are available in various specifications as per the demand of the clients. We make sure that only quality tested and also approved pipes get dispatched to the customers without any damage. They find several applications in the industry and are manufactured keeping in mind the industry standards and norms.

Details :

SS 904L 904L is a high-alloy austenitic stainless steel with low carbon content. The grade is use under severe corrosive conditions. It has been application proved over many years now and was originally developed to resist corrosion in dilute sulfuric acid. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content.
Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion. Hot Working Hot work should proceed after uniform heating to 2000-2200 F. Does not work the material at less than 1800 F.
Full annealing should follow any hot work to re attain maximum ductility and corrosion resistance. Cold Working Although higher forces are required, 904L will respond in a similar fashion to other austenitic stainless steels like 304, 316 or 317. Most common operations can be successfully performed.

Chemical Composition

C	Cr	Cu	Mn	Mo	Ni	P	S	Si
Max	-	-	Max	-	-	Max	Max	Max
0.02	19.0-23.0	1.0-2.0	2	4.0-5.0	23.0-28.0	0.045	0.035	1

Mechanical Properties

Grade	Tensile Strength (MPa)	Yield Strength 0.2%	Elongation (% in 50mm)	Hardness
Min		Proof (MPa) min	Min	Rockwell B (HR B)Brinell (HB)
904L	490	220	36	70-90 typical	150

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Company Details

Attention : Purchase Department
We would like to introduce ourself as Stockholders , Distributors of Special Alloys , Nickel Alloys , Super Alloys, 17-4 PH, Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 718, Inconel 800, Inconel 800H, Inconel 825, Incoloy A 286 , Alloy 904L, SMO254, Monel 400, Monel K-500, Hastealloy C 276, Hastealloy C 22, Hastealloy B, Nickel 200, Nickel 201, Titanium Alloys, Duplex, Stainless Steel , Carbon Steel & All type of High Performance Alloys in form of Sheets, Plates, Bars, Round Bar, Square Bar, Hex Bar, Pipes, Tubes, Circle, Flat Bar, Pipe Fittings, Forged Fittings, Flanges, Nut Bolts Etc With EN 10204/3.1 B Mill Certificate
MANUFACTURE Of STAINLESS STEEL, DUPLEX , HIGH NICKEL ALL0YS PIPE FITTINGS , FORGED FITTINGS , FLANGES & Nut Bolts Etc
Pipe Fittings Detail :- Elbow / Short Radius Elbow / Long Radius Elbow / 3D BEND / 5D BEND / Concentric Reducer / Eccentric Reducers / Caps / Long Stubend / Tee / Coupling / Reducing Tee / Nipples / Union / Dairy Fittings & All Type Of Butweld
Flanges Detail :- Supply Conditions: Blind Flanges / Slip on Flanges/ Socket Welding Flanges/ Lap joint Flanges / Threaded Flanges/ Weld Neck Flanges Also as per Drawing
Nut Bolts :- Hex Bolts / U Bolts / Eye Bolts / Allen Cap / Nuts / Locknuts / Set Screws / Washers / Threaded Rod / Stone Cladding Clamp / Refactory Clamp Etc
Forged Fittings Detail :- Elbow/ Tee/ Cross Tee/ Square Plug/ Hexgean Plug/ Nipple/ Cap/ Coupling/ Socolet/ Weldolet/ Threadolet/ Outlet for Thread Type & Socket Welding. All Type Socket Weld & Forged Fittings. In Class 2000Lbs, 3000Lbs, 6000Lbs, Standard : DIN, ASME B 16.11, JIS, Thread : ISO, DIN, NPT, BSPT
We Supplying High Temperature Resistance Alloy & Strictly According to ISO 9001 International Standard.
our products are fully certified to thespecifications such as ASM , ASTM , ASME & International Standard. Or according to the special requirements of our customers. We have clients all over India. The Quality has been rewarded by our current customers.
We would be glad to have your enquiries so that we will submit our most competitive offers
We also supplied ALL TYPES OF STAINLESS RAW MATERIAL & HIGH NICKEL RAW MATERIAL ( EXOTIC RAW MATERIAL ) ETC
If any of the listed items are of interest please contact us and we will be most pleased to offer you our most competitive prices.