Rotary Gear Pump Type HGBX

Listing ID #4198907

Get Latest Price

Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

ROTODEL rotary pump type "HGBX" is a self priming bi-directional positive displacement gear pump in simple two piece cast iron construction with single helical modified profile carbon steel gears....

View More Details

Send Enquiry

Product Details

ROTODEL rotary pump type "HGBX" is a self priming bi-directional positive displacement gear pump in simple two piece cast iron construction with single helical modified profile carbon steel gears shrunk fitted on alloy steel hardened & ground shaft as impeller firmly supported on 4 nos of seld-lubricated sintered bronze bush bearing. The pump can be run in either direction with change in Inlet-Outlet port position.The relief valve operations can be reversed by simply changning the R.V. parts on opposite side. The motorised pump-set in mono-block design ensures perfect alignment, saves space & reduces down time.

1) casing & covers - ci gr20, is-210
2) Drive shafts-EN-9 hardened & ground
3) Impeller gears-EN-8 toughened
4) Bush-Bearing-sintered bronze
5) Seals-Oilseals nitrile rubber
6) R.V. Spring- AISI S.S.302
7) R.V.Ball Valve-EN-31 hardened & ground
8) R.V. Screw & plug-Brass
9) Key for Coupling-Mild steel.

SPECIAL NOTES

For calculating power requirement, multiply unit hp per Kg Pressure with duty point pressure & add no load viscous hp of appropriate viscosity, adquate margin may be provided to this.
Higher/Lower rating motor can be employed based on duty point power requirement than what is specified as above.
Bracket in different height available to match the height of electric motor.

"HGBX" series pumps are designed to run at 1440 RPM up to viscosity of 500 CST, for higher viscosity it is desirable to reduce speed for sizes above 1^1/4". Performance at low speed is always advantageous as it improves efficiency reduces noise level & NPSHR & enhances operational life, Capacity will reduce in proportion to the speed.

Uses

Due to simple & compact design & with mono-block version these pumps are ideally suitale for OE application of engine lubrication, pumping & heating units, oil filtration, cleaning & cooling systems. The pump can also be used for general purpose application to handle viscous liquid such as fuel oil, lube oil, LSHS, mineral oil, transformer oil, LDO paints, varnish, glue, glycerine, soap solution, sugar solution & molasses.

H.P. Chart

Pump Model & Size 'P.Q' BSP	Capacity at 1440 RPM			POwer Req.			WT. in KG.
	Capacity at 1440 RPM			No Load Viscous hp		Unit hp. per Kg. press	WT. in KG.
	LPM	US GPM	M3/hr	200 CST	500 CST	Unit hp. per Kg. press	Pump with Motor	Pump with L-Type Braket
HGBX-025 1/4" X 1/4"	2.5	0.65	0.15	0.10	0.20	0.10	1.5	9.0
HGBX-025 1/4" X 1/4"	5.0	1.30	0.30	0.15	0.22	0.012	1.5	9.0
HGBX-050 1/2" X 1/2"	10.0	2.05	0.60	0.20	0.27	0.025	2.0	12.0
HGBX-050 1/2" X 1/2"	15.0	4.00	0.90	0.25	0.22	0.037	2.0	12.0
HGBX-075 3/4" X 3/4"	20.0	5.30	1.20	0.40	0.45	0.050	4.0	17.0
HGBX-075 3/4" X 3/4"	30.0	6.65	1.50	0.40	0.50	0.065	4.0	17.0
HGBX-100 1" X 1"	35.0	9.30	2.10	0.50	0.60	0.078	5.0	32.0
HGBX-100 1" X 1"	50.0	13.30	3.00	0.60	0.70	0.120	5.0	32.0
HGBX-125 1 1/4" X 1 1/4"	60.0	16.00	3.60	0.75	0.90	0.134	7.5	45.0
HGBX-125 1 1/4" X 1 1/4"	75.0	20.00	4.50	0.80	0.95	0.170	7.5	45.0
HGBX-150 1 1/2" X 1 1/2"	100.0	26.60	6.00	0.90	1.05	0.230	9.0	65.0
HGBX-150 1 1/2" X 1 1/2"	125.0	33.30	7.50	1.00	1.15	0.280	9.0	65.0
HGBX-200 2" X 2"	150.0	40.00	9.00	1.05	1.20	0.340	16.0	90.0
	200.0	53.30	12.00	1.15	1.30	0.450
	250.0	65.80	15.00	1.25	1.40	0.560
HGBX-250 2 1/2" X 2 1/2"	300.0	80.00	18.00	1.35	1.55	0.670	33.0	120.0
	350.0	93.30	21.00	1.50	1.70	0.780
	400.0	105.2	24.00	1.65	1.85	0.890

Pump Model & Size 'P.Q' BSP	Pump & Pumpset Dimensions
	Motor hp & Frame Size	Overall				Mounting								Shaft
	Motor hp & Frame Size	A A1	B B1	C L	H3 h3	D2 E	D3 D4	D5 D6	d1 B2	F F1	K K1	M M1	N N1	D D1	E1 J	H H1	h h1
HGBX-025 1/4" X 1/4"	0.50	118.5	64	88	107	45	72	59	8.0	74	78	35	60	09	25	63	71
HGBX-025 1/4" X 1/4"	0.71	368	145	77	170	47.5	6.8	8.0	-	163	136	90	112	11.0	18	53.5	61.5
HGBX-050 1/2" X 1/2"	0.75	158.5	70	123	120	52	82	66	10.5	96	90	40	70	11	30	71	80
HGBX-050 1/2" X 1/2"	80-M	443	165	91	200	61.0	8.5	8.0	-	199	152	100	125	13.0	25	58.5	67.5
HGBX-075 3/4" X 3/4"	1.00	196.0	80	153	134	60	92	75	10.5	123.5	108	45	85	13	35	80	80
HGBX-075 3/4" X 3/4"	80-M	481	213	110	200	63.0	8.5	10.0	-	228	152	100	125	16.0	25	66.13	66.0
HGBX-100 1" X 1"	2.0	204.0	90	158	150	68	100	83	10.5	131	120	50	93	16	35	90	90
HGBX-100 1" X 1"	90-L	544	195	125	186	66.0	10.5	10.0	150	251	168	125	140	19.0	25	73	73
HGBX-125 1 1/4" X 1 1/4"	3.00	244.0	100	196	168	75	115	94	125	157	145	60	105	19	40	100	100
HGBX-125 1 1/4" X 1 1/4"	100-L	624	215	155	250	67.0	10.5	12.5	160	299	192	140	160	22.5	32	80.5	80.5
HGBX-150 1 1/2" X 1 1/2"	5.00	263.0	108	203	190	85	125	105	12.5	165	150	70	115	24	45	112	112
HGBX-150 1 1/2" X 1 1/2"	112-M	668	235	160	275	81.0	10.5	12.5	170	314	222	140	190	23.5	35	90	90
HGBX-200 2" X 2"	7.5	323.5	142	253	232	100	148	125.0	12.5	210	190	100	140	24	55	132	132
HGBX-200 2" X 2"	132-S	793	275	196	320	95.0	14.0	15.0	190	404	254	140	216	28.0	40	105	105
HGBX-250 2 1/2" X 2 1/2"	10.00	382	160	298	260	115	165	140	12.5	242	210	120	155	27.0	70	160	132
HGBX-250 2 1/2" X 2 1/2"	132-M	892	275	222	320	108.5	14.0	18.0	190	438	254	178	216	31.0	45	128	100

Product Images

Company Details

Sub: Introduction & Standardization for 'ROTODEL' Rotary positive displacement Rotary Gear Pump, Oil Pump, Screw Gear Pump, Twin gear Pump, Triple Twin Gear Pump, Mini Mono Block Gear Pump, Chemical Pump, Loading-Unloading Fuel Oil Skids, Force Lubrication System & Lube Oil System.
Dear Sir,
With pleasure we introduce ourselves as a medium scale professionally managed design, development, manufacturing & marketing organization exclusively engaged in business of 'Rotary positive displacement gear pump' under brand name 'ROTODEL'.
In last 30 years since our inception, we have designed & developed more than 250 model/ size of pumps covering almost all viscous liquid application. 'ROTODEL' rotary -pumps are well known for its compactness & reliability. Efficiency of all our pumps is 25% to 30% more than conventional gear pump offered by any other indigenous manufacturer. Advantages of both screw pump & gear pump have been combined in our pump to make it as efficient & noiseless as screw pump and as simple & cost economical as gear pump. Use of best materials with appropriate surface treatment enhances the working life of the pump to the great extent. Standardization in design ensures interchangeability of parts & easy availability of spares.
Our clientage has also grown steadily in past years winning many OEMs public sector giants & private sector leaders have preferred our pumps, enclosed client list testifies our above claim. We are also approved by consultant like EIL, Jacob H&G, UHDE, Dasturco , PDIL, Desein, Tata Consult. Engrs., DCEL , Davy Power Gas, Indian Navy etc. & we also offer testing to any inspecting authority. At our end each pump are tested individually for its performance & workmanship.
We request you to Visit our Web Site: www.delpump.Com for more information. We also request you to standardize Rotodel make Gear Pumps for the entire offshore requirement.
Please forward us following information to enable us to quote.
1) Flow :-
2) Liquid to be handle :-
3) Discharge Pressure :-
4) Operation Temperature :-
5) Viscosity at operating Temperature :-
6) Required Bare Pump or complete pump set :-
7) If Pump set then, with flame proof motor or non flame proof motor? :-
8) Quantity:-
On receipt of your above information we shall forward our offer.
We appreciate you early reply.
Now we request you to please forward us with your valued enquiry.
Thanking you, Yours faithfully,
For, DEL PD PUMPS & GEARS (P) LTD.,
Darshini Deliwala
Executive (Marketing)
+919998817576.
dd@delpump.com
www.delpump.com