Listing ID #134759
Company Information
Ask for more detail from the seller
Contact Supplier
Roll Crushers are compression type crushers, and were once widely used in mining. They have, within the last 10 or so years, fallen into dis-favor among mining and processing companies. The roll crushers are not nearly as productive as cone crushers, with respect to volume, and they do have a little higher maintenance associated with them. Roll crushers do, however, give a very close product size distribution, and if the ore is not too abrasive, they do not have high maintenance costs.
Roll crushers have a theoretical MAXIMUM reduction ratio of 4:1. If a 2 inch particle is fed to the roll crusher the absolute smallest size one could expect from the crusher is 1/2 inch. Roll crushers will only crush material down to a minimum particle size of about 10 Mesh (2 mm). A roll crusher crushes using compression, with two rolls rotating about a shaft, towards the gap between the rolls. The gap between the rolls is set to the size of product desired, with the realization that the largest feed particle can only be 4 times the gap dimension.
The particles are drawn into the gap between the rolls by their rotating motion and a friction angle formed between the rolls and the particle, called the nip angle. The two rolls force the particle between their rotating surface into the ever smaller gap area, and it fractures from the compressive forces presented by the rotating rolls. Some major advantages of roll crushers are they give a very fine product size distribution and they produce very little dust or fines. Rolls crushers are effectively used in minerals crushing where the ores are not too abrasive and they are also used in smaller scale production mining of more abrasive metal ores, such as gold. Coal is probably the largest user of roll crushers, currently, though. Coal plants will use roll crushers, either single roll or double roll, as primary crushers, reducing the ROM coal. Usually, these crushers will have teeth or raised forms on the face of the roll. (Roll crushers used for minerals and metal ores have smooth faced rolls.)
Features:
High capacity
High reliability
Easy replacement of wear and spare parts
Stone broken percentage large, Cubical shape of final product
Large feed opening and force-feeding action from the inward and downward eccentric movement of the swing Jaw increases capacity.
Deep pitch gripper Jaws for maximum reduction.
Mechanical hydraulic Jaw setting adjustment.
Model | Roll Dia | Size in mm width | Production (Approximate) | Motor HP |
---|---|---|---|---|
RC-8060 | 800 | 600 | 15 TO 25 TPH | 15-30 |
RC-10060 | 1000 | 600 | 30 TO 40 TPH | 30-50 |
RC-10080 | 1000 | 800 | 40 TO 50 TPH | 40-60 |