Rodent Repellent System

 Controller with LCD display.

Can connect upto 24 Transducers

with blinking LED’s in a single loop

Modbus output and potential-free

relay output for BMS integration

Two way communication between

the controller and computer

LCD display with onboard controls

for changing the following

parameters

Wave Speed: Its an indicator for

the number of frequency sweeps

per minute. It can have a

maximum value of 130 and a

minimum value of 60. The

incremental size is 5 i.e. 65, 70, 75

and so on

Wave Density: Its an indicator for

the number of divisions within a

frequency band. It can have

maximum value of 100 and a

minimum value of 80. The

incremental size is 10 i.e. 80, 90

and 100

Frequency Band Time: Is an

indicator of the time for which the

controller would operate in a

pre-programmed frequency band.

There are 3 bands available: Band

A, Band B, and Band C. This

parameter can have maximum

value of 10 min per band and a

minimum value of 1 min per band.

Depending upon the time frame

the controller will switch the bands

automatically

Frequency Testing: This feature

will enable the user to test and

verify the frequency that is being

transmitted from the controller to

the transducer. This feature would

be particularly useful during

systems audit

Transducer Testing: All the 24

transducers can be tested in an

audible range all at a time using

this feature

Frequency band of > 20 kHz and