Resin Silicone Conformal Coating (422B), Form : Liquid

We are engaged in supplying Silicone Conformal Coating (422B) in Maharashtra, India. Silicone Conformal Coating (422B) is a flexible finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock. It protects and insulates the electrical and electronic components & assemblies including generators, motors, transformers, relays, and solenoid coils. For spraying, the liquid can be thinned by using M.G. Thinner Cleaner. Thin up to one-half parts thinner to one part coating.

Details :

• Certified UL 94V-0 (File # E203094)
• Maximum Service Temperature of 200^oC
• Fast Cure - tack free in 6 min at room temperature, full cure in 20 min at 65^oC
• Protects electronics from moisture, corrosion, fungus, thermal shock, and static discharges
• Easy to inspect: fluoresces blue at 437 nm ± 65 cm under UVA light
• Extended Shelf Life avoids worries about premature hardening and wastage
• Easy rework and repairs

Directions of Use

• Best results will be obtained by applying to thoroughly cleaned and dried parts or materials. It is essential that surfaces be free of any trace of grease or organic substances.
• At room temperature, the product will tack free in approximately 5-7 minutes, and full cure will be achieved in approximately 48 hours.
• Curing may be accelerated by applying moderate heat with either a convection oven or infrared lamps. We recommend curing in a convection oven at 65^oC (149^oF) for one hour, but other temperature and time combinations can work well. Heat curing will improve the physical strength of this coating.