Rad Check Meter Type : RC 705I manufactured by NUCLEONIX SYSTEMS is

primarily designed to inspect & measure Radioactive Contamination (RaC) in

steel samples such as billets, rods, rounds, flates, castings, Automotive /

Engineering components etc. Components in different sizes & shapes can be

inspected by this meter. This Rad Check Meter is widely used globally by many

steel industries. This is a Portable Hand Held Meter, designed around

integrally coupled 1" x 1" NaI (Tl) Scintillator to a 1" x 1.5" PMT, will offer

an optimum performance in counting Low-Level Gamma contamination.

This unit has Two modes of measurement namely Doserate mode &

countrate mode. In doserate mode it measures in two 'Unit' i.e., nSv/hr and in

countrate mode it can measure in CPS & also in CPM modes. Dose rates close

to natural background levels can be measured accurately.

This Rad Check Meter is an ideal choice for the Recycled steel /casting

industry & Engineering component industry & serves as a good quality

assurance (QA) tool to check for Radioactive Contamination (RaC).

This unit employs micro controller based design and has number of unique

features. User can store upto 1000 readings at the press of a button and can

recall back, for visual indication on a dot matrix LCD display. This unit is

provided with a built-in Serial port (optionally) through which the stored data

can be down loaded into PC.

Rad Check Meter Type : RC 705I manufactured by NUCLEONIX SYSTEMS is

primarily designed to inspect & measure Radioactive Contamination (RaC) in

steel samples such as billets, rods, rounds, flates, castings, Automotive /

Engineering components etc. Components in different sizes & shapes can be

inspected by this meter. This Rad Check Meter is widely used globally by many

steel industries. This is a Portable Hand Held Meter, designed around

integrally coupled 1" x 1" NaI (Tl) Scintillator to a 1" x 1.5" PMT, will offer

an optimum performance in counting Low-Level Gamma contamination.

This unit has Two modes of measurement namely Doserate mode &

countrate mode. In doserate mode it measures in two 'Unit' i.e., nSv/hr and in

countrate mode it can measure in CPS & also in CPM modes. Dose rates close

to natural background levels can be measured accurately.

This Rad Check Meter is an ideal choice for the Recycled steel /casting

industry & Engineering component industry & serves as a good quality

assurance (QA) tool to check for Radioactive Contamination (RaC).

This unit employs micro controller based design and has number of unique

features. User can store upto 1000 readings at the press of a button and can

recall back, for visual indication on a dot matrix LCD display. This unit is

provided with a built-in Serial port (optionally) through which the stored data

can be down loaded into PC.