Company Information
Ask for more detail from the seller
Contact SupplierPyrophyllite belongs to the montmorillonite group of minerals. It is remarkably similar totalc, which belongs to the same mineral family, except that magnesium is substituted foraluminium. In fact, chemical tests are often requires to tell the two apart.pyrophyllite breaks or exfoliates into leaves when fired to temperatures in excess of800°C as a result of dehydration of its structure.
Structure
Pyrophyllite has a sheet-like structure consisting of two silicate layers being sandwichedbetween gibbsite (Al(OH)3) layers
Properties of Pyrophyllite
Pyrophyllite is quite soft with a Mohs hardness of 1 to 1.5 and can be scratched witha finger nail | ||
It can be machined to tight tolerances using conventional maching techniques and tools | ||
It is thermally stable up to about 800°C when it will begin to exfoliate |
Usages
Historically pyrophyllite has been used for carving statues and ornaments owing to its relative ease of machinability. More recently,resistors, transducer cores, high vacuum gaskets and insulators in electron microscopes.
Other uses for pyrophyllite are in:
Ceramic formulations e.g. tile and refractory compositions | |||||||||||||||||||||||||||||||||||||||||||||||
Plastics and rubber as a filler | |||||||||||||||||||||||||||||||||||||||||||||||
Paint | |||||||||||||||||||||||||||||||||||||||||||||||
Insecticides
|
ngredients | MP- 1 | MP- 2 | AP |
SiO2 | 45.0% | 56.0 - 59.0 % | 55.39 % |
Al2O3 | 40.0 +/- 2% | 33.0 – 35.0 % | 34.9 0 % |
Fe2O3 | 00.60% | 0.50 % | 1.56 % |
TiO2 | 1.60 % | - | 0.20 % |
MgO | 0.50% | - | 0.79 % |
CaO | 0.50% | - | - |
Alkalies | - | - | 1.34 % |
LOI | !2.00 + / - 1 % | 5.5 – 6.0 % | 5.12 % |
Colour | Pinkish white | White | Greyish white |
Brightness | High | 88 | 93 |
Bulk density | - | 0.5 gm/cc | 1.205gm/cc |
Ph | - | 7.5 | - |
Oil absorption ml/100gm | - | 45.0 | - |