Listing ID #7314949
Company Information
Ask for more detail from the seller
Contact Supplier
PRECISION TEMPERATURE CONTROLLED HI-VACUUM THERMAL EVAPORATING COATER has a wide application range and can prepare various metal thin films and organic thin films, and thus is widely used for electrode preparation and preparation of organic light-emitting LEDs.This equipment is small in size, which can effectively save laboratory space; it is easy to operate and has strong adaptability to different materials, so it is widely used in the laboratories of universities and research institutes.
Precision temperature controlled hi-vacuum thermal evaporating coater features:
| Input Power | Input voltage: 208 – 240 VAC 50/60 Hz, single phase Input Power: 500 W Output Power : 40 A max current. Recommended working current <30 A Power cable included without plug |
|---|---|
| Temperature Control & Heaters | Tungsten coil heater with a thermocouple is built in at the bottom of alumina crucible (for temperature control. Standard S type thermocouple (included and installed) – heating from 200℃ – 1500℃ Optional B-type thermocouple (at extra cost) – heating from 1200 ºC – 1700℃ One digital temperature controller with 30 programmable segments and +/- 1℃accuracy The time settings of temperature controller are in seconds. Recommend to limit the temperature heating / cooling rate to 0.3℃/s (or 20℃/min) below 1200 ºC, and limit to 0.15 ℃/s (or 10℃/min) from 1200 – 1700℃ For continuous heating above 1300℃, please limit the operation time to less than 1 hour to preserve the service life of bottom flange O-ring. For fast coating up to 2000℃, such as needed in Carbon coating, the user can remove thermocouple, alumina thermal block, and alumina crucible, load evaporation material directly into the tungsten coil heater, and use current manual control mode. Four alumina crucibles (up to 1700℃) and two tungsten coil heaters are included. |
| Sample Holder | One 50 mm Dia. rotatable sample stage and its shutter are installed on top flange. Rotating speed: 5 rpm The distance from sample holder to evaporation source is adjustable from 40 mm to 85 mm |
| Vacuum | KF25 vacuum port is installed to connect to a vacuum pump The highest vacuum may reach <4.0E-6 Torr by pumping overnight with optional Turbomolecular pump A vacuum pump is required for coating. Please choose from the following Product Options No vacuum pump. Anti-Corrosive Capacitance Diaphragm Gauge is included for vacuum up to 1.0E-6 Torr. Double Stage Rotary Vane Vacuum Pump with vapor trap to eliminate the oil mist, which can reach vacuum up to 1.0E-2 Torr for evaporating noble metallic materials, such as gold, silver, and organic materials. Anti-Corrosive Capacitance Diaphragm Gauge is included. Compact Turbomolecular Vacuum Pump System is able to provide vacuum level up to 2.0E-5 Torr for evaporating oxygen sensitive materials, such as Al. Mg, Li, etc. A combined Pirani and cold cathode gauge are included with pump to measure vacuum up to 1.0E-8 Torr. |
| Gas Inlet | 1/4 tube fitting is built in for chamber purge or forming gas processing One needle valve is built-in to control gas flowing rate |
| Quartz Chamber Dimension | O.D.:165mm I.D.: 150mm Length: 250mm |
| Warranty | One year limited warranty with lifetime support |
Nano Science and Technology Company, founded by Mr Peeyush Dixit in 2013, has been a pioneer as a supplier and importer of multiple electronic and industrial uses chemicals in Gautam Buddha Nagar, Uttar Pradesh India. With a committed commitment to advantage and a customer-centric approach, we have established ourselves as a dependable name in both domestic and corporate sectors.
We recognize the importance of a clean and organized environment, be it at home or in the workplace. Our products are tailored to meet the exclusive requirements of each client, certifying the successful completion of all customer purposes. Whether it's Sputtering Systems, or Education and Research & Development areas, our team of skilled specialists is devoted to delivering top-notch results with efficiency and reliability.
Vision: Our products must fulfill all the industrial requirements also, renowned for our commitment to excellence, innovation, and sustainability.
Our service range
We are prominently providing reliable products like Muffle Furnaces, Vacuum Oven, Turbo Molecular Pump Station, Oxygen Plasma Cleaner, Lab Thin Film Coating System, Plasma Sputtering Coater, Thermal Evaporation Coater, Precision Temperature Controlled Hi-Vacuum Thermal Evaporating Coater etc.
Why us?
Providing reliable and trustworthy products
Equipped with highly knowledgeable staff
Having multiple ranges of products
Transparent pricing structure
Providing online support as well
Nature of Business
Manufacturer / Exporter / Supplier
Number of Employees
20 - 50
Year of Establishment
2013
Connect with us
For Buyer 
For Seller 
Help 
