Listing ID #4171086
Company Information
Ask for more detail from the seller
Contact SupplierÂ
The POPE Professional® MA-7200 is 2U and MA-8200 is 3U, high performance power amplifier designed to meet the most stringent needs of professional use in concert touring, high quality sound reinforcement and professional fixed installations. This amplifier is fully comparable with the other Professional Series amplifiers.
Â
FeaturesThe MA Series Amplifiers can use stadium, dance hall, concerts and touring live performances.
Frequency Response | ±0.1 dB from 20 Hz to 20 kHz at 1 watt | ||
Phase Response | ±10 degrees from 10 Hz to 20 kHz at 1 watt | ||
THD | 0.05% | ||
Intermodulation Distortion (IMD) |
<0.35% (60 Hz and 7 kHz at 4:1, from full rated output to -30dB) | ||
Signal-to-Noise Ratio | >105 dB A-weighted or 100 dB unweighted below rated power, 20 Hz - 20 kHz. | ||
CMRR (20 Hz to 1 kHz) | > 55 dB, typically > 70 dB | ||
Crosstalk | > 80 dB (below rated power, 20 Hz to 1 kHz) | ||
Slew Rate | 80V/usec | ||
Damping Factor | >2,000 from 10 Hz to 400 Hz | ||
Input Impedance (Nominal) | 20KΩ Balanced | ||
Signal Input | Two balanced 3-pin female XLR connectors | ||
Signal Output | Parallel two balanced 3-pin male XLR connectors | ||
Input Sensitivity gain | 0.775 / 1 / 1.44 Volt | ||
Output Circuitry | Class H | ||
Output Connector | Two sets of Red & Black color coded binding posts & two Neutrik® Speakon® 4 pole chassis connector | ||
Connectors | Neutrik® 3-pin XLR, Neutrik® Speakon® 4 pole chassis connector | ||
LED Indicator | Power, Signal, Protect, Clip | ||
Protection | Protected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature, chain destruction phenomena, input overload damage and high-frequency blowups. Also protect loudspeakers from input/output DC and turn-on/turn-off transients | ||
Cooling System | Internal heat sinks fitted with four variable speed fans for uniform heat dissipation from rear to front air flow | ||
Construction | Steel chassis with durable black powder coat finish | ||
Power Supply | Toroidal Transformer | ||
Power Range | 200 - 240VAC @ 50Hz | ||
Mains | Powercord | ||
Input Power (Watts) | 1600W | 1900W | |
Dimension (W x D x H) | 482mm × 443.5mm × 88.8mm | 482mm × 468mm × 132mm | |
Size | 2U | 3U | |
Net Weight | 22.5 Kg (49.6 lbs) | 32.1 Kg (70.1 lbs) | |
Gross Weight | 26.2 Kg (57.7 lbs) | 36.0 Kg (79.3 lbs) |
Model | MA-7200 | MA-8200 | ||
Article No. | #10011 | #10012 | ||
Number of channels | 2 | 2 | ||
Total output all channels driven | 3000 W @ 4 ohms | 4600 W @ 4 ohms | ||
Max. Output Power | 4 ohms | 8 ohms | 4 ohms | 8 ohms |
Per channel watts | 1500 W | 950 W | 2300 W | 1500 W |
Bridge Mono | 3000 W | 1900 W | 4600 W | 3000W |