Powder Filling Machine

Powder filler is made strong and vibration free by its specially designed pillar structure. This is made from mild steel round pipe section of good thickness hard chrome plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel augur which performs the filling inside the nozzle.
The lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitations and ensuring that the flights are fully filled. The startstop signals to the auger drive, control the pre-set weight in weigh metric fillers.
technical specifications afae200:
 machine size: 1050 l x 700w x 1600mm height.
 drive motor :12 hp 230vac 50hz, 1440 rpm. With vfd
 power : 230vac 50hz single phase
 stirrer motor: 14 hp 50rpm 230vac worm geared
 electromagnetic clutch- brake: 14 t 24 vac cryotron make
 all material contact parts in s.s. 304
 stainless steel 304 augur ( screw) type filling.
 hopper size 40 litres (s.s 304), 18 gauge, mirror finish for afae200
 fill capacity: 20-200 gms at a time as per set weight.