We are well reckoned among the key Pocket Size Gas Detector Manufacturers and Suppliers, based in India. Pocket Detector, offered by us, is designed for the use of safety and maintenance personnel for detecting leakage of all combustible gases in and around gas pipes, fires, boilers, cookers, etc. Our Pocket Gas Detector is a must for any one and every one living and working with flammable gases like LPG, Butane, Propane, CNG, Methane, etc., be it household, restaurant, hotel, factory, plant, etc.
How to use

• Insert the battries and replace the battery cover
• Slide the power switch to the On position. The gas Detector will give an audible alarm then all three LED's will flash for a few seconds
• The green LED will flash and the buzzer will beep once every 2 seconds. The gas Detector is now ready for use
• Point the gas sensor towards the area suspected gas leakage, if gas is found, The audible alarm will sound and the yellow and red LED's will illuminate according to the amount of gas concentration detected.

Do and Don't

• As the unit is made of several sensitive electrical circuits handle it carefully
• Don't not blow into the sensor or allow the unit to get wet
• Remove the batteries when instrument is not in use

How to test

• Expose the sensor to test gas or gas from lighter(without flame). If the red LED illuminate or buzzer the detector is operating correctly

Features

• Detects : LPG, Butane, Propane, CNG, Methane
• Seeks out traces of gas
• Single button operation
• 2 Alarms-low and high
• Sleek & very light weight

We are well reckoned among the key Pocket Size Gas Detector Manufacturers and Suppliers, based in India. Pocket Detector, offered by us, is designed for the use of safety and maintenance personnel for detecting leakage of all combustible gases in and around gas pipes, fires, boilers, cookers, etc. Our Pocket Gas Detector is a must for any one and every one living and working with flammable gases like LPG, Butane, Propane, CNG, Methane, etc., be it household, restaurant, hotel, factory, plant, etc.
How to use

• Insert the battries and replace the battery cover
• Slide the power switch to the On position. The gas Detector will give an audible alarm then all three LED's will flash for a few seconds
• The green LED will flash and the buzzer will beep once every 2 seconds. The gas Detector is now ready for use
• Point the gas sensor towards the area suspected gas leakage, if gas is found, The audible alarm will sound and the yellow and red LED's will illuminate according to the amount of gas concentration detected.

Do and Don't

• As the unit is made of several sensitive electrical circuits handle it carefully
• Don't not blow into the sensor or allow the unit to get wet
• Remove the batteries when instrument is not in use

How to test

• Expose the sensor to test gas or gas from lighter(without flame). If the red LED illuminate or buzzer the detector is operating correctly

Features

• Detects : LPG, Butane, Propane, CNG, Methane
• Seeks out traces of gas
• Single button operation
• 2 Alarms-low and high
• Sleek & very light weight