Listing ID #4217222
Company Information
Ask for more detail from the seller
Contact SupplierMaterials | |
---|---|
Sheet / roll | Woven HDPE black fibres fabric, double-side lamination with LDPE coating, reinforced with six bands of 75 mm width woven black HDPE fibres fabric and coated outside. Pre-punched 8 mm holes on the two side bands at 0.1 m +/-10% intervals, positioned in the centre of the bands (only the reinforcement bands are pre-punched, not the tarpaulin itself). |
Tensile strength | Min 500 N, 15-25% elongation in warp and weft in plain sheet under ISO 1421-1 |
UV resistance | After 1500 hours UV under ASTM G53/94 (UVB 313 nm peak) minimum 80% of original value of the actual product and not less than 475 N |
Reinforcement bands | Min 700 N as per ISO 1421-1, pulling lengthwise in a prepunched 8 mm hole with a hook of 8 mm wire diameter, at 200 mm from the end of the band. UV resistance 80% of original value and not less than 665 N. |
Welding | Only one is allowed, lengthwise. The tarpaulin tensile strength crossways at the place of welding under ISO 1421-1 minimum 50% of original value and not less than 400 N |