Pipe Tee manufacturers in India, Equal/Reducing Tee suppliers, Pipe Tee Suppliers In India, Pipe Tee Exporters In India Manufacturer, exporter & suppliers of A403 WP304L, A403 WP316L, ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43,carbon steel Tee, stainless steel Tee, alloy steel Tee, Pipe Tee distributors In India, Pipe Tee traders In India. A403 Gr WP347 Tee, A403 Gr WP347H Tee, A403 Gr WP317 Tee, A403 Gr WP 317L Tee manufacturers, Stainless Steel Buttweld Tee, A234 WPB Tee, A234WPC Tee, A420 WPL6 Tee, A234 WP5 Tee suppliers, A234 WP11 Tee, A403 Gr WP304 Tee, A403 Gr WP 304L Tee, UNS N08904 Tee, UNS S17400 Tee, A403 Gr WP316Ti Tee, UNS S32109 Tee, A403 Gr WP321 Tee, A403 Gr WP321H Tee suppliers, Pipe Tee stockholder in india, Pipe Tee wholesaler in india

An ISO 9001:2008 Certified Company, Maha Bhairav Stainless Steel is one of the leading manufacturer & exporters of Stainless Steel Tee, Pipe Elbow, Pipe Tee, Pipe Cross, Pipe Reducer, Pipe End Cap, Pipe Bends, Stubend – Lap Joint, Pipe Nipples, Pipe Outlet Fittings. We specialise in the manufacture of special size and custom shape pipe tee for our customers.We can manufacture Elbow upto 48″ with wall thickness ranging from 1.5 mm thickness up to 40mm for varied sizes.

We are higher quality Manufacturer of Pipe Fittings, Butt welded Fittings, A403 Gr WP304, A403 Gr WP 304L, A403 Gr WP316, A403 Gr WP316L, A403 Gr WP316Ti, A403 Gr WP321, A403 Gr WP321H, A403 Gr WP347, A403 Gr WP347H, A403 Gr WP317, A403 Gr WP 317L,  A420 Fittings, Carbon Steel Buttweld Fittings, Alloy Steel Pipe Fittings, ASTM A234 Fittings, A234 Alloy Steel Pipe Fittings, Alloy Steel Buttweld Fittings with relevant test certificates of raw materials and finished products.

Type A Tee, Decreased pressure factor

Same wall thickness on the weld ends and on the fi tting body as for a pipe with the same specifi ed wall thickness. Their resistance to internal pressure is less than that of a pipe with the same diameter, same wall thickness and made of the same grade of steel.

The required calculation methods are based on the calculation standards defined in EN 13480-3

Type B Tee, Full pressure factor

Increased wall thicknesses on the fitting body, same resistance to internal pressure as for a pipe with the same diameter, same wall thickness and made of the same grade of steel.

The required calculation methods are based on the calculation standards defined in EN 13480-3

Each fitting must be permanently marked.

Marking through hard stamping.

•  Manufacturer‘s mark or logo
•  Country of manufacture (ISO-Code)
•  “EN2” as reference to this standard
•  “B” for fittings of type B
•  Steel name or steel number
•  “W” (for welded fittings or fittings that are manufactured from welded pipes)
•  Cast number or code number
•  Mark of the inspection representative
•  Outside diameter D*
•  Wall thickness T*

EN 10253-2 Fittings & Tee are delivered with or without surface protection at the discretion of the manufacturer.

EN 10253-4 Fittings &Tee are delivered by the manufacturer in normal packaging, without surface protection, and without end protectors (caps). Special packaging, protective coverings, and end protectors (caps) can be agreed.

Pipe Tee manufacturers in India, Equal/Reducing Tee suppliers, Pipe Tee Suppliers In India, Pipe Tee Exporters In India Manufacturer, exporter & suppliers of A403 WP304L, A403 WP316L, ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43,carbon steel Tee, stainless steel Tee, alloy steel Tee, Pipe Tee distributors In India, Pipe Tee traders In India. A403 Gr WP347 Tee, A403 Gr WP347H Tee, A403 Gr WP317 Tee, A403 Gr WP 317L Tee manufacturers, Stainless Steel Buttweld Tee, A234 WPB Tee, A234WPC Tee, A420 WPL6 Tee, A234 WP5 Tee suppliers, A234 WP11 Tee, A403 Gr WP304 Tee, A403 Gr WP 304L Tee, UNS N08904 Tee, UNS S17400 Tee, A403 Gr WP316Ti Tee, UNS S32109 Tee, A403 Gr WP321 Tee, A403 Gr WP321H Tee suppliers, Pipe Tee stockholder in india, Pipe Tee wholesaler in india

An ISO 9001:2008 Certified Company, Maha Bhairav Stainless Steel is one of the leading manufacturer & exporters of Stainless Steel Tee, Pipe Elbow, Pipe Tee, Pipe Cross, Pipe Reducer, Pipe End Cap, Pipe Bends, Stubend – Lap Joint, Pipe Nipples, Pipe Outlet Fittings. We specialise in the manufacture of special size and custom shape pipe tee for our customers.We can manufacture Elbow upto 48″ with wall thickness ranging from 1.5 mm thickness up to 40mm for varied sizes.

We are higher quality Manufacturer of Pipe Fittings, Butt welded Fittings, A403 Gr WP304, A403 Gr WP 304L, A403 Gr WP316, A403 Gr WP316L, A403 Gr WP316Ti, A403 Gr WP321, A403 Gr WP321H, A403 Gr WP347, A403 Gr WP347H, A403 Gr WP317, A403 Gr WP 317L,  A420 Fittings, Carbon Steel Buttweld Fittings, Alloy Steel Pipe Fittings, ASTM A234 Fittings, A234 Alloy Steel Pipe Fittings, Alloy Steel Buttweld Fittings with relevant test certificates of raw materials and finished products.

Type A Tee, Decreased pressure factor

Same wall thickness on the weld ends and on the fi tting body as for a pipe with the same specifi ed wall thickness. Their resistance to internal pressure is less than that of a pipe with the same diameter, same wall thickness and made of the same grade of steel.

The required calculation methods are based on the calculation standards defined in EN 13480-3

Type B Tee, Full pressure factor

Increased wall thicknesses on the fitting body, same resistance to internal pressure as for a pipe with the same diameter, same wall thickness and made of the same grade of steel.

The required calculation methods are based on the calculation standards defined in EN 13480-3

Each fitting must be permanently marked.

Marking through hard stamping.

•  Manufacturer‘s mark or logo
•  Country of manufacture (ISO-Code)
•  “EN2” as reference to this standard
•  “B” for fittings of type B
•  Steel name or steel number
•  “W” (for welded fittings or fittings that are manufactured from welded pipes)
•  Cast number or code number
•  Mark of the inspection representative
•  Outside diameter D*
•  Wall thickness T*

EN 10253-2 Fittings & Tee are delivered with or without surface protection at the discretion of the manufacturer.

EN 10253-4 Fittings &Tee are delivered by the manufacturer in normal packaging, without surface protection, and without end protectors (caps). Special packaging, protective coverings, and end protectors (caps) can be agreed.