Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to form the basic fundamentals of correct threadings. All the gears are made of case hardened steel with extra large face width and tooth thickness and cut on hobbingmachine for noiseless operation even at high speeds. Naturally they are built with high standards of workmanship, material and quality.

Headstock : 
The Headstock is of top quality casting proving support to the spindle bearings. The spindle swing or taper roller bearings are of best steel with a grounded finish to give accurate results. Gears of Head Stock are running in Oil Bath with Oil level window.

The Bed : 
The Bed is pillar type having two pillars made of best steel, nicely grounded and also aligned accurately to the headstock alignment.
The Saddle: 
The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the head stock alignmernt.
The Apron : 
The Apron gives movement to the Saddle with head transfer along with pillars through steel rack and pi8nion arrangements. Its all gears are made of best steel.

Vice Jaws : 
The Vice Jaws are fitted on the saddle with V-ways accurately. The jaws are made of best steel and are well hardened. The movements of jaws are controlled by a screw on the saddle.
Lead Screw : 
The lead screw attachment is an extra device which has been arranged to support thethread cutting chassers in big threading machines, only having eleven TPI range.

Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to form the basic fundamentals of correct threadings. All the gears are made of case hardened steel with extra large face width and tooth thickness and cut on hobbingmachine for noiseless operation even at high speeds. Naturally they are built with high standards of workmanship, material and quality.

Headstock : 
The Headstock is of top quality casting proving support to the spindle bearings. The spindle swing or taper roller bearings are of best steel with a grounded finish to give accurate results. Gears of Head Stock are running in Oil Bath with Oil level window.

The Bed : 
The Bed is pillar type having two pillars made of best steel, nicely grounded and also aligned accurately to the headstock alignment.
The Saddle: 
The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the head stock alignmernt.
The Apron : 
The Apron gives movement to the Saddle with head transfer along with pillars through steel rack and pi8nion arrangements. Its all gears are made of best steel.

Vice Jaws : 
The Vice Jaws are fitted on the saddle with V-ways accurately. The jaws are made of best steel and are well hardened. The movements of jaws are controlled by a screw on the saddle.
Lead Screw : 
The lead screw attachment is an extra device which has been arranged to support thethread cutting chassers in big threading machines, only having eleven TPI range.