Pid controllers

Listing ID #4882554

Get Latest Price

OutputsTHREE, Programmable outputs with modular attachments Relay module SSR module 4-20 mA module Retransmission module
Retransmission4-20 mA or 20-4 mA or 0-20 mA or 20-0 mA programmable, Non-isolated, Retransmission assign for O/P 2 and O/P 3 Provided on request
Resolution1 or 0.1 or .01 or .001 programmable
ALARMSAssigned for O/P2 and O/P3 Alarm Types : Low / High /Band /Deviation / End of Profile Alarm Acknowledge : Latchable / Unlatchable Alarm Inhibit : Available
Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

View More Details

Product Details

CONTROLS
Range Refer 'table A''
Resolution 1 or 0.1 or .01 or .001 programmable
Parameter Setting By soft touch, Elegant, Sturdy membrane keys & User friendly menu driven software
PROFILER 2 Profile Programmes / 8 Segments Each Each segment programmable for either RAMP or SOAK Profiler can be configured as : - RAMP/SOAK - RAMP/RAMP - SOAK/SOAK - SOAK/COOL Soak Time programmable in HH-MM , MM-SEC Overshoot control during
INPUT Control Outputs Rating Relay SPST 230V / 3 Amp, 12 volts DC pulses for , 4-20 mA (Load 450 ohms)
Ananciation L.E.D's 7 L.E.D.'s , 3 mm , multi colour, 3 for O/P's, 1 each for A/M, Alarm, Profile, Soak Time
Soak Timer Assigned for O/P 2 or O/P 3, Soak Timer programmable (HH-MM or MM-SEC) Set Point Start up or Power on start up
Ambient Compensation automatic, ambient 0-60°C
Overshoot Control Provided
Input ONE UNIVERSAL Input Thermocouples : J,K,T,R,S RTD's : PT-100, PT-1000 DC mA : 0 – 20 mA, 4 – 20 mA (Maximum 12 Volts) DC mV : ± 50 mV, ± 100 mV, ± 200 mV, ± 250 mV DC Volts : ± 1V, ± 3.3V, ± 5V, ± 10V
Note Output modules are predefined All three outputs can be assigned as relay or SSR or 4-20 mA, this means at a time either 3 relays or 3 SSR's or 3 4-20 mAs outputs also available
Display Super bright in 4 + 4 format , with NO BLINK programming technique Upper 4 digits 0.5" red colour Lower 4 digits 0.39" green colour
Manual Output Provided, 0 to 100%
Control Modes Heat / Cool / Heat-Cool
Communication RS485, 2-Wire, Half duplex RS485 MODBUS on request, MODBUS RTU or ASCII Baud Rate Programmable 1200/2400/4800/9600, contact factory for higher Baud Rates
Outputs THREE, Programmable outputs with modular attachments Relay module SSR module 4-20 mA module Retransmission module
Control Action Assign PID for O/P 1 and O/P 2 ON-OFF for O/P 1, O/P 2 , O/P 3 T/P for O/P 1, O/P 2 , O/P 3
Retransmission 4-20 mA or 20-4 mA or 0-20 mA or 20-0 mA programmable, Non-isolated, Retransmission assign for O/P 2 and O/P 3 Provided on request
ALARMS Assigned for O/P2 and O/P3 Alarm Types : Low / High /Band /Deviation / End of Profile Alarm Acknowledge : Latchable / Unlatchable Alarm Inhibit : Available
Control Action PID / On-OFF / TP PID P = Propotional Band = 1.0 to 999.9 units adjustable I = Integral = 0 to 3600 ( 0-1200) seconds adjustable D = Derivative = 0 to 500 seconds adjustable CT = Cycle Time = 0.5 to100 seconds adjustable On-OFF Hys

Anupam's introduces state of art, truly universal, powerful PID controller with inhouse design. The PID2020 series is developed with state of art microcontroller. The robust hardware and software makes the controller very useful in noisy industrial environment. The PID2020 finds applications in Industrial Ovens, Muffle Furnaces, B.O.D. Incubators, Humidity Chambers, Environmental Chambers, Sterlizers, Blood Bank Equipments, Constant Temperature Baths, Packaging, Plastic Moulding, Thyristors Heat Controllers, Motor Controllers, Controlled Melting, Valve Control...etc.

Features

Initializing the controller integral to a desired value
Increasing the setpoint in a suitable ramp
Disabling the integral function until the PV has entered the controllable region
Limiting the time period over which the integral error is calculated
Preventing the integral term from accumulating above or below pre-determined bounds.

INPUT	SENSOR	RANGE	ACCURACY
R.T.D.	PT-100	-200 to 600^°C	± 1^°C
R.T.D.	PT-1000	0 to 500^°C	± 1^°C
THERMOCOUPLES	Chromel/Alumel (K)	0 to 1300^°C	± 1^°C
	Iron - Constantan (J)	0 to 750^°C	± 1^°C
	Copper-Constantan (T)	-200 to 350^°C	± 1^°C
	Pt / Rh (R or S)	0 to 1700°C	± 1^°C
D.C. LINEAR INPUTS	4 to 20 mA / 0 to 20 mA	User Programmable	± Least count
	± 50 mV, ± 100 mV,	User Programmable	± Least count
	± 200 mV, ± 250 mV	User Programmable	± Least count
	± 1V, ± 3.3V,	User Programmable	± Least count

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Company Details

Established in 1984 & Pioneers in developing Ceramic Band Heaters in India, Today we are one of the leading Indian companies to manufacture wide range of quality Heating elements for Plastic & Other Allied Industries. Since our inception, we have established a strong foothold in the Indian & Overseas market.
With sound technical expertise, large resource pool & experience gained for over more than two and half decades our company continues to maintain & exceed standards in terms of quality, customer satisfaction and timely delivery that are demanded by the best of companies across the globe. A team of technically sound & dedicated engineers along with best in class modern infrastructure and qualitative inputs, Anupam Heaters is poised to perform an increasingly important role in polymer and plastic manufacturing sector.
With the mindset of adherence to quality standards, Anupam Heaters is the 1st Indian Heater Manufacturing company to undergo audit for Quality Management System by Lloyd's Register and achieved certification under ISO — 9001-2000. Currently certified under ISO 9001-2008, we take great pride to inform that our products are also meeting the European Safety Standard EN60335-1 “CE-Mark”.
As experts in the field of Heating Elements, we always strive to deliver a Solution to our esteemed customers than a mere Product. Furthermore, we believe that there is always room for improvement which helps us to continuously think on our feet and give an improved solution to our clients. Innovation has always been a core ideology of the company which helps us in developing superior products to cater the market more efficiently.
Anupam is a professionally managed company that believes in maintaining sustainable long term relationships with all its key stakeholders including employees, customers and suppliers. In-house ERP system utilization helps to deliver efficient and consistent results in terms of operations to the highest level. Anupam has always strived to set benchmarks in the Heating Industry through continuous improvement and development of Heaters .