PI541A 6 Digit Process Indicator, for Industrial, Voltage : 220V

Listing ID #5204961

SANSEL offers are extremely versatile Indicators that can be used for a wide variety of applications.These Universal indicator offer high precision 6 digit resolution & extreme reliability and low cost for Process measurement. PI541A is a Microprocessor based instrumentation ensures accurate readings for all Linear Parameters, RTD, ohms & different type of Thermocouples. A number of programmable features including In-line calibration are standard. PI541A can offer relay outputs for signals exceeding set points, optional Programmable 4 -20mA or 0 - 10V DC Isolated output and also Optional RS 485 (2 wire ) MODBUS protocol output is provided .
Features

• 6 Digit 7 segment red LED display
• High Accuracy
• Compact Size
• 24 Bit ADC Resolution
• Wide Selectable Range between -199999 to 199999 counts
• Selectable Inputs RTD, all types of thermocouples, mA, mV,Voltage & ohms.
• Easy Field Configurable with Front Key Calibration
• No Hardware Selection for the Input Signals
• Optional Opto Isolated Re-Transmission Output
• Optional RS 485 (2 wire) MODBUS protocol
• 24V DC External Sensor Excitation Supply
• Programmable Decimal Point & Display Noise Filter
• Universal Supply Voltage 90 to 270 AC / DC

Specifications :

• Display 6 Digit 7 segment red LED
• Inputs 0 - 20 mA, 0 to 75 mV, -10 to 10 V DC, 0 - 400 Ù (H & L Limit Programmable)
• RTD - PT 100, Thermocouple - J, K, R, S, T, B, N, E
• Range* Analog - - 199999 to 199999 (H & L Limit Programmable)
• RTD &TC - RTD - PT 100 (-199 to 850°C / 327 to 1562°F)
• RTD - PT 1000 (-50 to 400°C / -58 to 752°F)
• TC - J (- 200 to 200°C / -328.0 to 2192°F)
• TC - K (- 200 to 1372°C / -327 to 2501°F)
• TC - R (- 40 to 1768°C / -40 to 3214°F)
• TC - S (- 40 to 1768°C / -40 to 3214°F)
• TC - T (- 200 to 400°C / -328 to 752°F)
• TC - B (300 to 1820°C / 572 to 3308°F)
• TC - N (-200 to 1300°C / -327 to 2372°F)
• TC - E ( -200 to 999 °C / -327 to 1832°F)
• Resolution 0.0001 / 0.001 / 0.01 / 0.1 / 1 Selectable for Analog
• 0.01 RTD - PT 100 and 0.1 for TC
• Accuracy ± 0.01 % of FS for Analog , ± 2 °C for TC and better than ± 0.2°C for RTD
• Unit Selection °C / °F (for RTD & TC inputs)
• Linearization Programmable custom Linearisation provided (1 - 21 points)
• Input signal filter 1 - 100 % user configurable
• Cold junction compensation Automatic inbuilt ‘ CJC ’ is provided
• Relay Output(*Alarm optional) 2 Relay(5A rated) with Four Relay Status Selection, Hysterisis, Cyclic Delay
• Alarm setting Front key settable
• Alarm indication Two LED on front panel
• Re Transmission**(optional) Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC for process variable
• PC Communication RS 485 (2 wire) with MODBUS protocol
• Sensor excitation Supply 24 V DC ±10% @ 100 mA
• Operating Environment 0 - 50ºC / 5 to 95 % RH Non Condensing
• Front panel IP 65 protection
• Power Supply 90 to 270 V AC / DC / 50 / 60 Hz
• Over All Dimension 48(H) X 96(W) X 110(D) mm
• Cut out Dimension 44(H) X 90(W) mm
• Housing Panel Mountable ABC Plastic
• Weight 250 grams (Approx.)