Listing ID #5976696
Company Information
Ask for more detail from the seller
Specifications
Description
Ultra designer tiles
heavy duty vitrified tiles
Range
Floor, wall, step & raiser
generally floor
Color
20 colors with special cloudy effect. Available from light colors to bright colors
Only maximum 3 colors available. Generally dull by nature
Designs
Various shapes with interlocking, combo tiles are available in different textures
Generally in square in size of 300x300 or 200x200
impact resistance
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur
poor impact resistance. The tiles may break in pieces and come out from the bonding
Skid resistance
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles
Hardness (MOH's)
> 6.0
>6.0
Breaking strength
Ultra-designer tiles is >2850 N
Generally it is > 1300 N
Abrasion resistance
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007)
Density (gm/cc)
>2.5
>2.0
Color Fastness
No color change
Cost
generally less than Rs 50/- per Sq ft.
heavy duty exterior grade cost more than rs 85/- per sq ft
Bondage with cement
Cement to cement is very good
Bonding for exterior is weak
By clicking Get Quotes Now, I accept the T&C and Privacy Policy.
Connect with us