Listing ID #2039494
Company Information
Ask for more detail from the seller
Contact Supplier
Founded in Gujarat(India), the company has garnered wide appreciation for its seamless quality products and client centric approach. Combining our expertise with the technology that we possess, we take the responsibility to deliver utmost quality Openwell Submersible Pump to the customers.
Intro :
C.R.I. Openwell Submersible Pumpsets are Ideally suitable for Openwells or Tanks where a wide fluctuation of water level occur. This work under water and rest at the Bottom of the well or Tank. Hence Suction and Priming problem will not arise. The optimal design of impellers and diffusers enables the best possible hydraulic efficiency. Motor sealing is made by polymers, rings, oil seals and sand guard to avoid ingress of well water / sand into the motor. Pressure equalizing rubber diaphragm is provided to guard the pressure and volume variation of water inside motor. Motor must be filled with clear, cold, drinking water as detailed in our operators manual. Three -phase motor requires an adequate motor protection control panel.
Applications
Features
| Power Range | 0.7 HP to 3 HP (0.37kW – 2.2kW) |
|---|---|
| Speed | 2880 RPM |
| Versions | Single phase 200-240 V, 50Hz, AC Supply. CSCR, Three-phase 380-450 V, 50Hz, AC Supply. |
| Maximum total head | Upto 108 metre |
| Maximum flow rate | 10 lps (36 m3 /hr) |
| Nominal outlet size | 25, 32, 40, 50 & 65 mm |
| Degree of protection | IP 58 |
| Direction of rotation | Counterclockwise from driving end (Vertical OWS) Clockwise from driving end (Horizontal OWS) |
| Type of duty | S1(Continuous) |
| Method of starting | CSCR |
| Maximum starts per hour | 10 |
| Part Name | Material |
|---|---|
| Outer Shell | Mild Steel / S.S |
| Diaphragm | High Nitrile Rubber |
| Lower Housing / Rear Cover | Cast Iron |
| Shaft | SS – 410 |
| Upper Housing / Bracket | Cast Iron |
| Shaft Seal | Nitrile butyl Rubber |
| Thrust Assembly | Leaded Bronze & Compostos / S.S 420 Vs Graphite Carbon |
| Journal Bearings | LTB4 |
| Sand Guard (Rubber | Nitrile Rubber |
| Locking Strip / The Rod | Mild Steel / S.S |
| Check Valve Housing | Cast Iron |
| Check Valve | Delrin |
| Check Valve Seat | Nitrile butyl rubber |
| Outer Shell / Casing | Cast Iron / S.S 304 / (DIN 1.4509 |
| Impeller | Cast Iron / Noryl / Delrin / S.S 304 |
| Diffuser Chamber | Noryl |
| Stop Ring | S.S 304 / Hylem |
| Intermediate Bearing (Sleeve / Bush) | S.S 304 / NBR |
| Suction inter Connector | Cast Iron |
| Pump Shaft | S.S 304 / S.S 410 |
| Coupling | S.S 304 / S.S 410 |
| Maximum liquid temperature | 330C (max.) |
|---|---|
| Permissible amount of sand | 50 gm/m3 (max.) |
| Allowable solid | 3000 ppm (max.) |
| Chlorine ion density | 500 ppm (max.) |
| Turbidity | 50-ppm silica scale (max.) |
| Hardness (Drinking water) | 300 ppm (max.) |
| Specific gravity | 1.004 (max.) |
| Viscosity | 1.75 x 106 m2/sec (max.) |
| pH Value | 6.5 to 8.5 |
Nature of Business
Manufacturer / Exporter / Service Provider / Supplier / Retailer / Retailer / Distributor
Connect with us
For Buyer 
For Seller 
Help 
