we are offering compacting machines.
open width compactor for knitted fabrics
on knitted fabrics, the desired full surface compactness and shine can be obtained from the compression and pressing of the fabric open width compactorbetween the felt, teflon and cylinder. this process can also be obtained with the open width compactor machine when desired as with fabric from the stenter, by placing or using the pin-chain stenter system before it, with fabric that have come out of the dryer.the machine is consisting of 5 units;
• a preliminary steamer, opener cylinders and automatic centralizing control unit,
• a compacting unit consisting of a second steamer, cylinders, felt and teflon,
• fluorescent fabric controller and a roll winding unit
• a fabric conveyor belt and plaiter unit.
• a fabric conveyor belt and cooling unit.
no tension exists with the means of adjustable openers and an automatic centralizing control unit, and a dimensional stability can be achieved with the two steamer units which spread steam homogeneously throughout the fabric and by the means in which, how the fabric is compressed by the cylinders which are found in different angles that have felt and teflon revolving around them.
after the compacting process, the fabric appears full and compact. the fabric which has passed through the cooling unit is neutralized of electricity with the static bars before it is plaited or wound into a roll.general specifications
• 30% nomex, 70%polyester,20x2500x2600 german made felt,
• italian made gear boxes, (siti – bonfiglioli)
• english made seven invertors (control techniques)
• italian – german made plc system and control panel (esa-vipa)
• french made pneumatic valves for heat control (joucomatic-parker)
• english-french made pneumatic controller parts (joucomatic-parker)
• french made electric and control parts (telemecanique)
mechanical documents
• all the toothed have been toughened against wear and wheted to work quieter
• in order to increase the performance of the machine and to reduce mechanical defects to minimum, bearings were used in abundance as much as possible and its measurements as large as possible.
• in order to prevent rust and wear, the working shaft and other parts of the machine are produced of aisi304 quality chrom nickel and rust-prof steel.
• the cylinders touching the fabric are wheted and covered with 150 micron hard chromium. other mechanical parts are covered with elocsal.

we are offering compacting machines.
open width compactor for knitted fabrics
on knitted fabrics, the desired full surface compactness and shine can be obtained from the compression and pressing of the fabric open width compactorbetween the felt, teflon and cylinder. this process can also be obtained with the open width compactor machine when desired as with fabric from the stenter, by placing or using the pin-chain stenter system before it, with fabric that have come out of the dryer.the machine is consisting of 5 units;
• a preliminary steamer, opener cylinders and automatic centralizing control unit,
• a compacting unit consisting of a second steamer, cylinders, felt and teflon,
• fluorescent fabric controller and a roll winding unit
• a fabric conveyor belt and plaiter unit.
• a fabric conveyor belt and cooling unit.
no tension exists with the means of adjustable openers and an automatic centralizing control unit, and a dimensional stability can be achieved with the two steamer units which spread steam homogeneously throughout the fabric and by the means in which, how the fabric is compressed by the cylinders which are found in different angles that have felt and teflon revolving around them.
after the compacting process, the fabric appears full and compact. the fabric which has passed through the cooling unit is neutralized of electricity with the static bars before it is plaited or wound into a roll.general specifications
• 30% nomex, 70%polyester,20x2500x2600 german made felt,
• italian made gear boxes, (siti – bonfiglioli)
• english made seven invertors (control techniques)
• italian – german made plc system and control panel (esa-vipa)
• french made pneumatic valves for heat control (joucomatic-parker)
• english-french made pneumatic controller parts (joucomatic-parker)
• french made electric and control parts (telemecanique)
mechanical documents
• all the toothed have been toughened against wear and wheted to work quieter
• in order to increase the performance of the machine and to reduce mechanical defects to minimum, bearings were used in abundance as much as possible and its measurements as large as possible.
• in order to prevent rust and wear, the working shaft and other parts of the machine are produced of aisi304 quality chrom nickel and rust-prof steel.
• the cylinders touching the fabric are wheted and covered with 150 micron hard chromium. other mechanical parts are covered with elocsal.