Listing ID #1457507
Company Information
Ask for more detail from the seller
Contact SupplierWe are specialized in the manufacturing, exporting, and supplying of Online Power UPS in all over the world. The Online Power UPS is designed to give unlimited power supply even in longer power cuts. The Online Power UPS is used in various applications and is provided by us at competitive prices.
Applications
Capacity | 500 VA to 50 KVA |
---|---|
Input Requirement | Voltage : 230 V Single Phase + 19% - 15% or 415 V Three Phase +/- 15% Frequency : 50Hz +/- 6% Rectifier : Automatic float cum boost charger, CVCC type. |
Out Put performance | Voltage : 230 V Single Phase + 1% or 400 V Three +/- 1% Frequency : 50Hz +/- 0.5Hz Wave from : Sine Wave |
Distortion | THD less than 5% with no single harmonic greater than % on linear load, Power Factor : 0.8 lagging to unity. |
Inverter Side | Inverter Efficiency : On full load better than 85% Control method : Sinusoidal PWM control Circuit Method : True on Line PWM UPS Zero Transfer Time |
Normal DC Voltage | 48 V DC / 60 V DC / 120 V DC 144 V DC / 240 V DC / 300 V DC Creast Factor : Better then 2.5 |
Transient Response | For step load change from 25 to 100% output voltage will remain within 10% and recovers to 2% within 60 msecs. |
Environmental | Cooling : Forced air cooled. Temperature : 0-50oC Ambient Humidity : 95% RH non condensing Acoustic Noise : Less than 60db at 2mts. from the cubicle. |
Protections | Input - Mains over voltage / under voltage |
Output | Output over voltage Output under voltage Output over current |
Battery | Battery over voltage Battery low Battery over current |
Alarms | Mains failure Battery reverse polarity (Optional) Battery low |
Indications | Mains : On, Over voltage, Under Voltage, Failure Battery : Charging, Low Inverter : On, Output high, Output low, Output over load trip |
Meters | Voltmeter to read input & output |
Controls | Mains : MCB Load : MCB ( Optional ) Inverter : DPDT |
Static Bypass : ( Optional ) | Adequately rated solid state switch which will transfer load from UPS to Mains within 10 Mesc. (synchronized ) 20 Msec. (unsynchronized) to avoid any damage to loads. |