SANSEL Online Conductivity Indicator, For Laboratory, Packaging Type : Plastic Box

The CC 603 - 1 series of Conductivity Controller and Transmitter provides a reliable method of Monitoring, Controlling & Transmitting 4 - 20mA / RS 485 MODBUS RTU Communication for Interfacing to PLC, Data logger, HMI, etc.,. This product is suitable to measure Conductivity in water treatment, Electrolytic water cleaning, Chemical Industries, Food Process, Waste Water treatment, Textile Industries & Neutralization process, etc. This Conductivity Controller & Transmitter can Measured using Industrial Conductivity Sensors, Temperature can be measured using temperature
sensor.
Features :

• Economical, Easy to Calibrate and Setup
• User selectable 5 ranges from 1μS to 200mS
• High Accuracy
• Programmable Auto / Manual Temperature Compensation
• Optional Isolated RS 485 communication with MODBUS RTU protocol
• Optional Galvanically Isolated 4 - 20mA Output
• Adjustable Cell Constant for particular ranges
• Manual single or 2 point Calibration
• 2 Relay Outputs with Configurable individual H / L Setting with 6 relay status
• Optional audible inbuilt buzzer Output
• Universal Supply Voltage 90 to 270V AC / DC

Specfications :

• Display 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display
• Cell Constant * 0.01 / 0.1 / 1(user selectable depends on range*)
• Range (any one) 1 - 20μS, 5 - 200μS, 10 to 2000μS, 1 to 20mS, 5 to 200mS
• Resolution 0.01μS to 0.1mS (depends on range)
• Temp. Compensation Manual / Automatic (-20.0 to +150.0ºC)
• Temp. Sensor RTD - PT 100 (3 wire)
• Temp. Coefficient 0 to 3 % / ºC(user adjustable)
• Electrode Input Conductivity cell on rear panel
• Accuracy ± 1 % of range ± 1 digit
• Set Point - 1 & 2 Two Set Point with 6 Relay Status Selectable
• Relay Output Relay - 1 for Setpoint - 1, Relay - 2 for Setpoint - 2 with 5A Rating
• Relay Hysterisis 0 to 500 counts (user adjustable)(only for High & Low control modes)
• Relay Cyclic delay 0 to 100 seconds (user adjustable)(only for High & Low control modes)
• Alarm Output(optional) inbuilt audible buzzer with front key reset
• Optional Re. Tx. output Galvanically Isolated 4 - 20 mA
• Optional Comm. output Isolated RS 485
• Comm. Protocol MODBUS RTU
• Operating Environment -10 to 50ºC / 10 to 95 % RH Non Condensing
• Power Supply 90 to 270V AC / DC 50Hz
• Dimension 96 x 96 x 85 mm.
• Cutout Dimension 92 x 92 mm
• Weight 500 grams (Approx.)