Oil Bath, is a type of heated bath which uses boiling oil as the temperature regulator. Since different oils have different boiling points it is possible to obtain a temperature near to the desired temperature by selecting an oil with a boiling point as close as possible to the desired temperature. The most common oils that are being utilized in oil baths are paraffin, glycerol, silicon oil or cottonseed oil due to their quite odorless characteristics.

Double Walled High Temperature Oil Bath is having wide range of application, such as oxidation stability test on oils, greases, etc, or any other test requiring high temperature control having high thermal efficiency. This oil bath was developed for a wide range of testing and meets ASTM specifications for Methods D471, D865, and D1313.

• Interior construction of stainless steel 304
• Outer construction-PCRC sheet /SS 304 (as per requirement)
• 75mm glass wool insulated on five sides
• Provided with High speed stirrer with speed regulator
• Control panel provided on the side of oil bath two neon lights and an ON/OFF switch.
• Perforated and removable diffuser shelves
• Microprocessor based temperature controller
• Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the baths to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient – the baths uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.
• Sturdy Construction – the baths are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Oil Bath, is a type of heated bath which uses boiling oil as the temperature regulator. Since different oils have different boiling points it is possible to obtain a temperature near to the desired temperature by selecting an oil with a boiling point as close as possible to the desired temperature. The most common oils that are being utilized in oil baths are paraffin, glycerol, silicon oil or cottonseed oil due to their quite odorless characteristics.

Double Walled High Temperature Oil Bath is having wide range of application, such as oxidation stability test on oils, greases, etc, or any other test requiring high temperature control having high thermal efficiency. This oil bath was developed for a wide range of testing and meets ASTM specifications for Methods D471, D865, and D1313.

• Interior construction of stainless steel 304
• Outer construction-PCRC sheet /SS 304 (as per requirement)
• 75mm glass wool insulated on five sides
• Provided with High speed stirrer with speed regulator
• Control panel provided on the side of oil bath two neon lights and an ON/OFF switch.
• Perforated and removable diffuser shelves
• Microprocessor based temperature controller
• Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the baths to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient – the baths uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.
• Sturdy Construction – the baths are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.