Non Polished Metal Reverse Osmosis Water Plant, Voltage : 110V

We are a prominent Manufacturer and Supplier of Reverse Osmosis Water Plant. The Reverse Osmosis Water Plant that we offer works on the principle of Reverse osmosis. It is the process of forcing a solvent from a region of high solute concentration through a membrane to a region of low solute concentration by applying a pressure in excess of the osmotic pressure. This is the reverse of the normal osmosis process, which is the natural movement of solvent from an area of low solute concentration when no external pressure is applied. The membrane here is semi permeable that allows the passage of solvent but not of solute. Our RO Mineral Water Plant possesses highest quality components. We have designed Reverse Osmosis Water Plant with main emphasis on functioning, affordability, easy operation and system expandability.
Our Reverse Osmosis Water Plant produces high quality permeate water from seawater, municipal and well water. The production rate is based on feed water at 25°C, with turbidity of less than 1 NTU, silt density index (SDI) of less than 5. The sea water RO systems are designed for a total dissolved solids of 36,000.
Working Of Reverse Osmosis Water Plant
The reverse osmosis process uses semi permeable spiral wound membranes to separate and remove dissolved solids, organic, pyrogens, sub micron colloidal matter and bacteria from water. Feed water is delivered under a pressure of approximately 16 kg/cm2 through reverse osmosis membranes. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% of all bacteria in the feed water.
The impurities are concentrated as the feed water passes through the reverse osmosis system and flows over the membrane. Impurities removed from the feed water are concentrated in the concentrate, or the reject stream. As impurities concentrate, they may reach saturation and precipitate. The operator must be certain that impurities in the feed water are not concentrated enough in the RO membranes to cause precipitation because precipitation can ruin the membranes.