One of the most popular applications of PSA Technology is in the operation of Nitrogen Generators. This Process is based on the selective adsorption phenomena of gas molecules which is Carbon based Molecular Sieve (C. M. S.) In Pressure Swing Adsorption system as soon as compressed air is entered through an adsorption tower filled with Carbon Molecular Sieve, the molecules of gases like oxygen, moisture & other undesired gases are adsorbed on surface of the adsorbent. While Nitrogen that is not adsorbed passes out of adsorption tower. It is then collected in a surge vessel. For continuous flow of Nitrogen two adsorption towers are installed. They are inter connected with Auto change over valves. These Auto change over valves are controlled by Timer Circuit, as the saturation of one tower with oxygen gets completed, in built mechanism makes the process automatically switch to another tower and thus the nitrogen production remains continuous. Nitrogen has a wide range of industrial application. Different Capacity of Laboratory Based Nitrogen Gas Generator are available

• Moisture Content < 2 ppm
• Oxygen < 5 ppm
• Total Hydro Carbon < 0.3 ppm
• CO & CO2 < 2 ppm
   

  Salient Features

   

  • Nitrogen Generator for low investment
  • Low Electric power consumption.
  • Calibrated needle valve to adjust purge flow.
  • No moving parts. Hence negligible maintenance.
  • Easily installed - just make the air connection
  • Plug in the electrical power cord.
  • Skid mounted unit need no pounds.
  • Pressure capacity : from 4.0 - 7.0 Kg/cm2

One of the most popular applications of PSA Technology is in the operation of Nitrogen Generators. This Process is based on the selective adsorption phenomena of gas molecules which is Carbon based Molecular Sieve (C. M. S.) In Pressure Swing Adsorption system as soon as compressed air is entered through an adsorption tower filled with Carbon Molecular Sieve, the molecules of gases like oxygen, moisture & other undesired gases are adsorbed on surface of the adsorbent. While Nitrogen that is not adsorbed passes out of adsorption tower. It is then collected in a surge vessel. For continuous flow of Nitrogen two adsorption towers are installed. They are inter connected with Auto change over valves. These Auto change over valves are controlled by Timer Circuit, as the saturation of one tower with oxygen gets completed, in built mechanism makes the process automatically switch to another tower and thus the nitrogen production remains continuous. Nitrogen has a wide range of industrial application. Different Capacity of Laboratory Based Nitrogen Gas Generator are available

• Moisture Content < 2 ppm
• Oxygen < 5 ppm
• Total Hydro Carbon < 0.3 ppm
• CO & CO2 < 2 ppm
   

  Salient Features

   

  • Nitrogen Generator for low investment
  • Low Electric power consumption.
  • Calibrated needle valve to adjust purge flow.
  • No moving parts. Hence negligible maintenance.
  • Easily installed - just make the air connection
  • Plug in the electrical power cord.
  • Skid mounted unit need no pounds.
  • Pressure capacity : from 4.0 - 7.0 Kg/cm2